Topside rack unit – 1000 W

Spare topside rack unit for ScanFish III, for power and communications over coax cable.

ScanFish III 3D steering ready option

With this option, a standard ScanFish unit will be fitted with a controller equipped with hardware and connectors required for the 3D side panels and thus the 3D steering option.

ScanFish III Motor Service

The service is conducted by qualified and highly specialised EIVA service personnel at EIVA's facility in Skanderborg, Denmark.

Rack computer

ScanFish Expansion MUX

Extra subsea bottle providing extra communication ports (8) and separate DC-DC modules (max 300W/max 5A per payload).

ScanFish Magnetometer Frame

Fixed Frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers.

Topside rack unit – 600 W

Spare topside rack unit for ScanFish III, for power and communications over coax cable.

USBL bracket tube – Ø91 mm

USBL bracket tube Ø91 mm for EIVA ScanFish III ROTV range.

USBL bracket tube – Ø70 mm

USBL bracket tube Ø70 mm for EIVA ScanFish III ROTV range.

USBL bracket – universal

USBL bracket – universal for EIVA ScanFish III ROTV range.

ScanFish Katria magnetometer cable – inner

Inner magnetometer cable for EIVA ScanFish Katria.

ScanFish Katria magnetometer cable – outer

Outer magnetometer cable for EIVA ScanFish Katria.

ScanFish Katria fairing

Fairing for EIVA ScanFish Katria.

ScanFish Katria pole

Pole for EIVA ScanFish Katria.

Termination – Ø6.53

Termination Ø6.53 for EIVA ScanFish III ROTV range.

Termination – Ø11.43

Termination Ø11.43 for EIVA ScanFish III ROTV range.

Wire bolt

Wire bolt for EIVA ScanFish III ROTV range.

NaviPac 4.5 Rigmove and tug management

27-29 Apr 2022 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of NaviPac 4.5 and the rig move and barge option. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

POM screw support

POM screw support for EIVA ScanFish III ROTV range.

NaviSuite Basic Operation Course

29-30 Mar 2022 Houston, Texas, USA

This course will be conducted as a classroom training course in OARS' offices in Houston US. The course is structured around a general curriculum to give the trainees a broad understanding of the EIVA NaviSuite navigation and acquisition software solutions and make
them confident in using them during navigation and data acquisition operations. To enhance trainee competence and confidence, typical construction support and acquisition  cenarios are used as examples throughout the training course.

Workhorse Navigator Doppler Velocity Log 1200 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

Deflection wire kit

Deflection wire kit for EIVA ScanFish III ROTV range.

NaviSuite Basic Operation Course

1-2 Mar 2022 Houston, Texas, USA

This course will be conducted as a classroom training course in OARS' offices in Houston US. The course is structured around a general curriculum to give the trainees a broad understanding of the EIVA NaviSuite navigation and acquisition software solutions and make
them confident in using them during navigation and data acquisition operations. To enhance trainee competence and confidence, typical construction support and acquisition  cenarios are used as examples throughout the training course.

Workhorse Navigator Doppler Velocity Log 600 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

Flap

Flap for EIVA ScanFish III ROTV range.

NaviSuite Nardoa processing w/pipe & cable inspection blended learning

22-24 Feb 2022 Houston, Texas, USA

This course will be conducted as a classroom training course in OARS' offices in Houston US. The course is structured around a general curriculum to give the trainees a broad understanding of the EIVA NaviSuite navigation and acquisition software solutions and make
them confident in using them during navigation and data acquisition operations. To enhance trainee competence and confidence, typical construction support and acquisition  cenarios are used as examples throughout the training course.

Tail guard

Tail guard for EIVA ScanFish III ROTV range.

NaviSuite NaviPac Configuration and Operation

14-17 Feb 2022 Virtual training

This course will be conducted via Microsoft Teams and will be held in Brazilian Portuguese. The blended learning course is structured around a general curriculum with the aim of giving the trainees a broad understanding of NaviPac Pro and make them confident in configuring and operating NaviPac onboard a vessel. Attendance at the course requires access to EIVA eLearning, which is included for 90 days in the course fee. 

BV3100 Boat Mount FLS with pan & tilt

Teledyne BlueView's BV3100 is ideal for search and recovery operations, dive team situational awareness and diver vectoring. It is also an effective means of harbour bottom inspection as well as diver and underwater IED detection.

Hatch, painted

Painted hatch for EIVA ScanFish III ROTV range.

NaviSuite processing with pipeline inspection

8-11 Feb 2022 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of the relevant NaviSuite software applied for Processing with pipeline inspection. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

DMS-05 sensor

The DMS range of motion sensors is designed specifically for the motion measurement needs of the marine industry. 

Bottom shell, painted

Painted bottom shell for EIVA ScanFish III ROTV range.

NaviSuite navigation, acquisition and processing

24-28 Jan 2022 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of the relevant NaviSuite software applied for navigation, acquisition and processing thus including NaviPac Pro, NaviScan, NaviEdit and NaviModel. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

Top shell, painted

Painted top shell for EIVA ScanFish III ROTV range.

Motor cable 1.8 metre

Motor cable 1.8 metre for EIVA ScanFish III ROTV range.

Motor cable 1.2 metre

Motor cable 1.2 metre for EIVA ScanFish III ROTV range.

Tritech MicronNav USBL tracking system

The MicronNav system is an innovative Ultra-Short Base Line (USBL) positioning system designed for small vehicles. 

DVL product selection guide

Pick your DVL solution... a simple 3-step process.

Trimble SPS585 GNSS Smart antennas - Base and heading unit

The SPS585 GNSS smart antenna incorporates a GNSS antenna, receiver, Wi-Fi Access Point, and battery in a rugged light-weight magnetic-mounted unit that is ideally suited for vehicle and polemounted applications. LEDs enable you to monitor position tolerance, correction status, Wi-Fi, Bluetooth wireless technology, and power. Wi-Fi and Bluetooth wireless technology provides cablefree communications between the receiver and the device (such as a tablet, smartphone, or laptop).

Altimeter cable

Cable for EIVA ScanFish III ROTV range altimeter.

Tasman DVL (multiple options)

The new Tasman DVL 600 kHz / 300 kHz from Teledyne RD Instruments with its wide array of advanced features, reduced size and increased range represents the next generation of DVL technology, taking your navigation to the next level.  

Pioneer Family - Phased Array Doppler Velocity Logs (multiple options)

Teledyne RDI ushers in a new era in Doppler velocity log (DVL) technology with the introduction of its 600kHz and 300kHz Pioneer phased array DVLs. 

Workshop Licence

The optimal tool if you wish to have a test platform for NaviScan/NaviPac Pro at your company’s premises.

Cormac 3

MacArtney Cormac winches are modular and self-contained in protective frames. They are constructed from glass-blasted AISI 304 stainless steel and require minimal maintenance.

Pressure sensor

Pressure sensor for the EIVA ScanFish III ROTV range.

NaviEdit Pro

Editing of overall survey settings, raw sensor data and geodetic settings through import of various types of laser and sonar data, including multi-beam echo sounders and side-scan sonars.

ScanFish Cable Telemetry Kit 600 W – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

Workflow Manager – Onboard Computer

AUV/USV integration of Workflow Manager features.

Minos•X CTD/SVP sensor, 1,000 m Delrin housing

Minos•X from AML is a small vertical profiler that allows you to change the instrument’s sensor load in the field and on demand.

ScanFish Cable Telemetry Kit 600 W – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

Workflow Manager – Server

Configurable workflow process automation tool allowing for automation of the small steps you normally go through when processing subsea data.

VS101 GPS Compass

For precise applications, you need the heading and positioning performance of the VS101 series GPS compass.

ScanFish Cable Telemetry Kit 1000 W – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

Side Scan Sonar 4200

The 4200 series is a versatile sidescan sonar system that can be configured for almost any survey application from shallow to deep water operations. 

Trimble SPS585 GNSS Smart antennas - Base and heading unit

The SPS585 GNSS smart antenna incorporates a GNSS antenna, receiver, Wi-Fi Access Point, and battery in a rugged light-weight magnetic-mounted unit that is ideally suited for vehicle and polemounted applications. LEDs enable you to monitor position tolerance, correction status, Wi-Fi, Bluetooth wireless technology, and power. Wi-Fi and Bluetooth wireless technology provides cablefree communications between the receiver and the device (such as a tablet, smartphone, or laptop).

ScanFish Cable Telemetry Kit 1000 W – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

Meridian Surveyor gyro

The higher performance gyrocompass, the Meridian Surveyor, provides a dynamic heading accuracy of 0.20° secant latitude RMS and a static heading accuracy of 0.05° secant latitude RMS.

Trimble SPS461 GNSS modular Heading receiver

The Trimble SPS461 is a flexible, modular, GPS Heading receiver that delivers precise heading and sub-meter horizontal positioning accuracy for marine and OEM applications. With Ethernet and browser interface provides remote access over the Internet or by cable for data and configuration.

NaviModel Analyser

Basic processing, visualisation and analysis of data in 2D, 3D and 4D.

ScanFish III Service

Service of ScanFish III

Nortek 1000 DVL

The DVL1000 from Nortek is the world’s smallest survey-grade Doppler Velocity Log. This version has a maximum operational depth of 300 m and is ideally suited for subsea navigation where size and weight are a concern. 

NaviModel Producer

Full software solution for data processing, cleaning, modelling and reporting.

Wayfinder DVL

The new Wayfinder DVL from Teledyne RD Instruments, at just 10 cm x 10 cm x 7 cm, is the smallest DVL Teledyne has designed, making it ideally suited for micro ROVs. 

NaviPac Pro

The most elaborate NaviPac variant for navigation information and positioning calculations.

ScanFish XL

Multi-purpose, high payload capacity ROTV for oceanographic surveys

Tritech MicronNav USBL tracking system

The MicronNav system is an innovative Ultra-Short Base Line (USBL) positioning system designed for small vehicles. 

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

ScanFish 3D steering

Enhance the manoeuvrability and flight path capabilities of ScanFish.

Workhorse Navigator Doppler Velocity Log 1200 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

OceanEnviro 10.4

The OceanEnviro^TM 10.4 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Altimeter

Altimeter for the EIVA ScanFish III ROTV range.

Rovins

iXblue’s Rovins is a survey-grade full-featured Inertial Navigation System (INS) for water depths up to 3,000 m. 

Cormac 3

MacArtney Cormac winches are modular and self-contained in protective frames. They are constructed from glass-blasted AISI 304 stainless steel and require minimal maintenance.

BV3100 Boat Mount FLS with pan & tilt

Teledyne BlueView's BV3100 is ideal for search and recovery operations, dive team situational awareness and diver vectoring. It is also an effective means of harbour bottom inspection as well as diver and underwater IED detection.

ScanFish Tropheus

The ScanFish Tropheus is a terrain-following ROTV especially designed for UXO detection

Workhorse Navigator Doppler Velocity Log 600 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

Octans Subsea

Octans 3000 is a subsea survey-grade gyrocompass and complete motion sensor for water depths up to 3,000 m.

NORBIT iWBMSh

This compact, high resolution, tightly integrated, broadband multi-beam sonar solution from NORBIT offers a curved array, a real-time sound velocity profiler and GNSS/INS that is suited for demanding environments (Applanix OceanMaster).

SES-2000 Compact Sub Bottom Profiler

The SES-2000 compact model is the smallest member of Innomar's SES-2000 sub-bottom profiler family. It was designed for inshore surveys in shallow water down to 400 metres water depth, but can also be used in coastal areas.

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

ScanFish Magnetometer Frame

Fixed frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers. 

OceanEnviro 10.4

The OceanEnviro^TM 10.4 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

NaviSuite Seismic Trigger

Vector V133 IMO GNSS Compass 50hz

Experience the Vector V133 IMO GNSS Compass 50hz for its precise heading accuracy and decimeter positioning performance.

NaviSuite Seismic Trigger

ScanFish Konia

The EIVA ScanFish Konia is a unique ROTV solution with an integrated, high-quality SVP sensor.

Meridian Surveyor gyro

The higher performance gyrocompass, the Meridian Surveyor, provides a dynamic heading accuracy of 0.20° secant latitude RMS and a static heading accuracy of 0.05° secant latitude RMS.

Sonic 2024

The Sonic 2024 is the world’s first broadband-wideband high-resolution shallow water multi-beam echo sounder. 

ScanFish Tropheus 3D

The ScanFish Tropheus 3D is a terrain-following ROTV especially designed for UXO detection. ScanFish Tropheus 3D is a hardware solution that augments the navigational capabilities of EIVA's range of ScanFish remotely operated towed vehicles (ROTVs) by introducing horizontal movement control capabilities.

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Vector V123 IMO GNSS Compass 50hz

Experience the Vector V123 GNSS Compass 50 hz for its precise heading accuracy and decimeter positioning performance.

Magnetometer cable and tow points

EIVA can supply magnetometer cables in any length, with or without mounted towpoints.

DMS-05 sensor

The DMS range of motion sensors is designed specifically for the motion measurement needs of the marine industry. 

C-Nav3050

The C-Nav3050 global navigation satellite system (GNSS) receiver provides 66-channel tracking, including multi-constellation support for GPS, and GLONASS.

Side Scan Sonar 4200

The 4200 series is a versatile sidescan sonar system that can be configured for almost any survey application from shallow to deep water operations. 

Sonic 2020

The Sonic 2020 is the most compact high-performance wideband shallow water multi-beam echo sounder, suitable for a wide variety of general mapping applications. 

ATTU-24

OceanEnviro 2.5

The OceanEnviro^TM 2.5 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Vector V133 GNSS Compass 20hz

Experience the Vector V133 GNSS Compass 20hz for its precise heading accuracy and decimeter positioning performance.

G-882 Marine Magnetometer

The Geometrics G-882 caesium-vapour marine magnetometer is a low-cost, compact system designed for professional surveys in shallow or deep water. 

OceanEnviro 1.7

The OceanEnviro^TM 1.7 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Minos•X CTD/SVP sensor, 1,000 m Delrin housing

Minos•X from AML is a small vertical profiler that allows you to change the instrument’s sensor load in the field and on demand.

Side Scan Sonar 4125i

EdgeTech’s 4125i sidescan sonar system comes with a portable topside unit and was designed with both the Search & Recovery (SAR) and shallow water survey communities in mind. 

2D Multibeam Imaging Sonar (M900-2250 Dual Frequency Series)

The 2D Multibeam Imaging Sonar is engineered to fit in small, tight spaces; it is 30% smaller than the popular P Series, and delivers the same crisp, real-time sonar imagery.

G-882 Marine Magnetometer

The Geometrics G-882 caesium-vapour marine magnetometer is a low-cost, compact system designed for professional surveys in shallow or deep water. 

ATTU-16

2D Multibeam Imaging Sonar (M900-2250 Dual Frequency Series)

The 2D Multibeam Imaging Sonar is engineered to fit in small, tight spaces; it is 30% smaller than the popular P Series, and delivers the same crisp, real-time sonar imagery.

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SPRINT 505 4k System

SPRINT is an acoustically aided Subsea Inertial Navigation system from Sonardyne for subsea vehicles and is depth rated to 4,000 m. 

Vector V123 GNSS Compass 20hz

Experience the Vector V123 GNSS Compass 20hz for its precise heading accuracy and decimeter positioning performance.

ProFlex 500

The ProFlex 500 is a positioning solution that delivers state-of-the-art RTK features in a rugged, highly integrated GNSS receiver design.

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Wayfinder DVL

The new Wayfinder DVL from Teledyne RD Instruments, at just 10 cm x 10 cm x 7 cm, is the smallest DVL Teledyne has designed, making it ideally suited for micro ROVs.