Key features
Eliminate data uncertainty with high-quality seabed imaging
ScanFish Tropheus is a terrain-following ROTV solution for UXO detection.
Eliminate data uncertainty with high-quality seabed imaging
ScanFish Tropheus is a terrain-following ROTV especially designed for UXO detection that eliminates data uncertainty with high-quality seabed imaging
Optimal side-scan sonar positioning
… through an intelligent ROTV functioning as depressorAccurate real-time data
… through continuous data acquisition close to the seabedEfficient operations that do not forgo safety
… through the possibility of using an unmanned vessel to tow the ROTVMonitoring and complete control of the vehicle
… through the user-friendly ScanFish III Flight softwareA long service life
… through quality materialsReduced risk of the ROTV suffering damages
… through robust design and a storage cradle-
Continuous acquisition of accurate and comprehensive data
ScanFish Rocio's pattern in the water column is easily adjusted to ensure well-founded results of the survey task at hand.
Continuous acquisition of accurate and comprehensive data
The intelligent control of the ScanFish Tropheus ensures that the ROTV together with the side-scan sonar mounted on the underside maintain a constant, fixed altitude in proportion to the seabed – and far closer than solutions without a depressor.
Add to this a high tow speed of up to 10 knots and the fact that the ScanFish Tropheus allows for continuous data acquisition, you are ensured more accurate and comprehensive data and thus extensively detailed images of any potential UXO targets.
It is possible to set the ScanFish ROTV to operate at a fixed height from the seabed via the ScanFish Flight software
-
Optional extras
The ScanFish Tropheus standard package combined with the optional extras constitute a turn-key UXO solution.
Optional extras of the ScanFish Tropheus package
The ScanFish Tropheus standard package combined with the optional extras constitute a turn-key UXO solution
ScanFish Tropheus is available with all the standard components and optional extras that are required to constitute a turn-key UXO solution.
From topside unit to subsea cable termination and multi-ping side-scan sonar, we offer you all the necessary components for an affordable UXO detection solution that will make a great difference to the safety and efficiency of future operations.
Optional extras
3D steering
Hardware solution which introduces horizontal movement control capabilitiesSide-scan sonar
EdgeTech 4205 Side-Scan Sonar.EIVA NaviPac software
General navigation and ROTV positioning (USBL or cable-layback)EIVA NaviScan software
Sonar acquisition and recording. Recording in EIVA SBD or XTF formatsEIVA NaviScan Target software
Sonar target processing, measurement and classification. XML target databasePinger
RJE International, Inc. ULB-362B, excl trackingROTV cradle
For deck mounting, incl tarpaulinEIVA OceanEnviroTM winch system
PC
Monitor
Tow cable
Choose from a variety of faired cable options to further reduce drag of your ROTV system -
User-friendly control and monitoring software solution
All ScanFish models come with the ScanFish Flight software, which is an easy-to-use software system allowing for control and monitoring of the ROTV.
User-friendly control and monitoring software solution
All ScanFish models come with the ScanFish Flight software, which is an easy-to-use software system allowing for control and monitoring of the ROTV.
Controlling the ROTV's movements in ScanFish III Flight software
Only a minimum of training is required to prepare the crew to operate the ROTV, which means you will be ready to set sail within a short period of time. Moreover, there is no risk of wasting time on difficulties resulting from a complicated software user interface.
Via the intuitive interface of ScanFish Flight, you are in complete control of the position of the ROTV by defining its height compared to the seabed. At the same time, you can monitor its position in the water, and an alert panel will warn you of any irregularities.
ScanFish III Flight in action
On-site calibration
A pre-flight feature allows for testing and calibration of the ScanFish ROTV on-site prior to deployment, promising you the highest possible performance and data quality.
Recording of flight data
Acquired ROTV data can be analysed by means of a flight recording feature. It enables you to play back all flights and, for example, quickly locate the cause of any irregularities, thus enhancing the quality of your results and saving survey time.
Automatic control of winch
ScanFish Flight can be set up to control the winch towing the ScanFish ROTV, thereby ensuring an optimal cable length adjusted to the movements of the ROTV. This is especially relevant for the ScanFish Konia and ScanFish Rocio models.
-
Robust product with a long service life
The practical design of the ScanFish models makes them so robust that they can be deployed in rough weather.
Robust product with a long service life
Quality materials and easily replaced wear parts characterise the ScanFish range and contribute to a high ROI through a long service life
The practical design of the ScanFish models makes them so robust that they can be deployed in rough weather. This saves time as the risk of downtime is vastly reduced. Two side plates with bars, which also function as handles, protect the body and facilitate handling, thus reducing the risks posed to the ROTV in the water and ensuring the safety of the crew during deployment and recovery.
-
Operator courses: repair, maintenance and practical training
EIVA hosts hardware operator courses delivering you the skills and knowledge you need to ensure you get the most out of you ScanFish ROTV.
Combining hands-on practice with expert guidance and advice.
EIVA hosts ScanFish operator courses designed to deliver participants the skills and knowledge to ensure they get the most out of their EIVA equipment.
Under guidance from our expert engineers, these operator training courses deepen your knowledge and understanding of the ScanFish ROTV, improve your practical operator skills and enhance your technical abilities to service and maintain your ScanFish. Featuring classroom work, technical workshops covering hardware repair and maintenance, as well as practical training at sea, EIVA ScanFish operator courses provide a comprehensive platform for expanding your competences.
If you’re interested in a ScanFish operator training course, reach out to let the EIVA team know. We will update you on upcoming hardware operator courses sailing your way.
Specifications
- ROTV DIMENSIONS
- Length
- 1.21 m
- Width
- 1.86 m
- Height
- 0.85 m
- Weight air/water
- 152/89 kg
- Colour
- Black
- PERFORMANCE
- Depth range
- 400 m
- Operational depth
- Up to 400 m – Depends on ScanFish configuration, operation speed and winch configuration – Use of automatic operation modes requires automatic winch control
- Towing speed
- 4-10 kt
- Dive/climb speed
- 0-2 m/sec
- Anti-collision climb
- 3 m/s = 45° at 6 kt
- Vertical position precision
- 0.2 m
- Roll precision
- 0.5°
- Max slope, terrain-following mode
- 20°
Related products
-
Side Scan Sonar 4205
The 4205 series is a versatile sidescan sonar system that can be configured for almost any survey application from shallow to deep water operations.
-
Equinox
Multi-aperture sidescan sonar towed with a ScanFish remotely operated towed vehicle (ROTV) for UXO operations. 3D steering lets you precisely control the flight path both vertically and horizontally.
Related news
How to rent equipment from EIVA
We would be happy to help you – reach out if you have any questions about our rental products.