ScanFish III Motor Service

The service is conducted by qualified and highly specialised EIVA service personal at EIVA's facility in Skanderborg, Denmark.

Rack computer

ScanFish Expansion MUX

Extra subsea bottle providing extra communication ports (8) and separate DC-DC modules (max 300W/max 5A per payload).

ScanFish Magnetometer Frame

Fixed Frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers.

Topside rack unit

Topside rack unit for EIVA ScanFish III ROTV range.

USBL – Benthos DAT

The Teledyne Benthos DAT (Directional Acoustic Transponder) is a modified ultra-short baseline (USBL) which uses a broadband component of a typical modem message to form estimates of arrival angle(s). All-in-one: Range, Bearing, and Data Communication.

USBL bracket tube – Ø91 mm

USBL bracket tube Ø91 mm for EIVA ScanFish III ROTV range.

USBL bracket tube – Ø70 mm

USBL bracket tube Ø70 mm for EIVA ScanFish III ROTV range.

USBL bracket – universal

USBL bracket – universal for EIVA ScanFish III ROTV range.

ScanFish Katria magnetometer cable – inner

Inner magnetometer cable for EIVA ScanFish Katria.

ScanFish Katria magnetometer cable – outer

Outer magnetometer cable for EIVA ScanFish Katria.

ScanFish Katria fairing

Fairing for EIVA ScanFish Katria.

NaviSuite Nardoa processing w. cable/pipeline data inspection

13-17 Apr 2020 Houston, USA

The classroom training course is structured around a general curriculum to give the participants at the course a broad understanding of the EIVA NaviSuite Nardoa processing software for cable/pipeline data inspection.

ScanFish Katria pole

Pole for EIVA ScanFish Katria.

Termination – Ø6.53

Termination Ø6.53 for EIVA ScanFish III ROTV range.

Termination – Ø11.43

Termination Ø11.43 for EIVA ScanFish III ROTV range.

NaviSuite Nardoa processing w. cable/pipeline data inspection

3-5 Mar 2020 Skanderborg, Denmark

The blended learning course is structured around a general curriculum to give the participants at the course a broad understanding of the EIVA NaviSuite Nardoa processing software for cable/pipeline data inspection. Attendance at the course requires access to EIVA eLearning.

POM screw support

POM screw support for EIVA ScanFish III ROTV range.

Deflection wire kit

Deflection wire kit for EIVA ScanFish III ROTV range.

Flap

Flap for EIVA ScanFish III ROTV range.

Tail guard

Tail guard for EIVA ScanFish III ROTV range.

Hatch, painted

Painted hatch for EIVA ScanFish III ROTV range.

Bottom shell, painted

Painted bottom shell for EIVA ScanFish III ROTV range.

Top shell, painted

Painted top shell for EIVA ScanFish III ROTV range.

DVL production selection guide

Teledyne RD Instruments Navigation Product Line provides a wide range of precision Doppler navigation solutions for academic, commercial and defence applications. 

Motor cable 1.8 metre

Motor cable 1.8 metre for EIVA ScanFish III ROTV range.

Motor cable 1.2 metre

Motor cable 1.2 metre for EIVA ScanFish III ROTV range.

Tasman DVL (multiple options)

The new Tasman DVL 600 kHz / 300 kHz from Teledyne RD Instruments with its wide array of advanced features, reduced size and increased range represents the next generation of DVL technology, taking your navigation to the next level.  

Pioneer Family - Phased Array Doppler Velocity Logs (multiple options)

Teledyne RDI ushers in a new era in Doppler velocity log (DVL) technology with the introduction of its 600kHz and 300kHz Pioneer phased array DVLs. 

Altimeter cable

Cable for EIVA ScanFish III ROTV range altimeter.

NaviEdit Pro

Editing of overall survey settings, raw sensor data and geodetic settings through import of various types of laser and sonar data, including multi-beam echo sounders and side-scan sonars.

Workshop Licence

The optimal tool if you wish to have a test platform for NaviScan/NaviPac Pro at your company’s premises.

Workhorse Navigator Doppler Velocity Log (multiple options)

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

NaviScan

Acquire data from all major pipe/cable trackers and sonars on the market.

Workflow Manager – Onboard Computer

AUV/USV integration of Workflow Manager features.

Pressure sensor

Pressure sensor for the EIVA ScanFish III ROTV range.

Model 4380 Multibeacon

EdgeTech’s Model 4380 Multibeacons are part of the underwater transponder/responder USBL product line focused on navigation and positioning.

Workflow Manager – Server

Configurable workflow process automation tool allowing for automation of the small steps you normally go through when processing subsea data.

USBL BATS Portable System

BATS Portable is an Ultra Short Baseline (USBL) Acoustic Tracking System, used for long range acoustic underwater tracking.

ScanFish Cable Telemetry Kit – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

USBL Broadband Acoustic Tracking System (BATS)

BATS is an Ultra Short Baseline (USBL) Acoustic Tracking System, used for highly accurate long range acoustic underwater tracking.

ScanFish Cable Telemetry Kit – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

NaviModel Analyser

Basic processing, visualisation and analysis of data in 2D, 3D and 4D.

ScanFish III Service

Service of ScanFish III

NaviModel Producer

Full software solution for data processing, cleaning, modelling and reporting.

ScanFish XL

Multi-purpose, high-payload capacity ROTV for oceanographic surveys

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Syrinx DVL 4k

Syrinx is a 600 kHz Doppler Velocity Log (DVL) from Sonardyne for surface and subsea vehicles and is depth rated to 4,000 m.

Nano transponder with depth sensor

Sonardyne’s smallest USBL transponder with compatibility with the Ranger 2 USBL topside systems; Micro, Mini and Standard.

ScanFish 3D steering

Enhance the manoeuvrability and flight path capabilities of ScanFish.

NaviPac Pro

The most elaborate NaviPac variant for navigation information and positioning calculations.

3D pipe option for NaviModel Producer

Efficient, model- and scan-based pipeline and cable route inspection, eventing and editing carried out with ROVs, ROTVs, AUVs and vessels.

Workhorse Navigator Doppler Velocity Log 1200 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

BlueROV2

The BlueROV2 is an affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s a good choice for ROV inspections, research, and adventuring. 

OceanEnviro 10.4

The OceanEnviro^TM 10.4 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Altimeter

Altimeter for the EIVA ScanFish III ROTV range.

VideoRay Mission Specialist Defender

The VideoRay Mission Specialist Defender ROV (remotely operated vehicle) utilises a system of interchangeable, modular components that communicate through a single, intelligent network. 

Workhorse Navigator Doppler Velocity Log 600 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

USBL Broadband Acoustic Tracking System (BATS)

BATS is an Ultra Short Baseline (USBL) Acoustic Tracking System, used for highly accurate long range acoustic underwater tracking.

SES-2000 Compact Sub Bottom Profiler

The SES-2000 compact model is the smallest member of Innomar's SES-2000 sub-bottom profiler family. It was designed for inshore surveys in shallow water down to 400 metres water depth, but can also be used in coastal areas.

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

ScanFish Magnetometer Frame

Fixed frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers. 

Nano transponder with depth sensor

Additional beacon(s) for Sonardyne Micro-Ranger 2 system with Nano transponder package.

NaviSuite Deep Learning – Rack Server

Onboard/on-site data processing of NaviSuite Deep Learning data

VideoRay Mission Specialist Series (MSS)

The VideoRay Mission Specialist ROV Series (MSS) utilises a system of interchangeable, modular components that communicate through a single, intelligent network.

Sonic 2024

The Sonic 2024 is the world’s first broadband - wideband high-resolution shallow water multi-beam echo sounder. 

TSS 350 cable tracker

The Teledyne TSS 350 system is designed specifically for the detection and survey of tone-carrying cables.

Cormac 3

MacArtney Cormac winches are modular and self-contained in protective frames. They are constructed from glass-blasted AISI 304 stainless steel and require minimal maintenance.

NaviSuite Deep Learning – Rack Server

Onboard/on-site data processing of NaviSuite Deep Learning data

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Sonardyne Micro-Ranger 2 system with Nano transponder

USBL package for tracking of mini ROVs and divers.

WSM6+ 4k MF Directional transponder

The Wideband Sub-Mini 6 Plus (WSM 6+) is Sonardyne’s latest generation of versatile USBL transponders/responders that support Wideband®2 signals. 

NaviSuite Deep Learning – Onboard Computer

AUV/USV integration of NaviSuite Deep Learning features.

VideoRay ROV maintenance & repair kit

EIVA can supply spare parts and maintenance and repair kits for VideoRay Scout, Explorer and Pro 4 ROV series.

Sonic 2020

The Sonic 2020 is the most compact high-performance wideband shallow water multi-beam echo sounder, suitable for a wide variety of general mapping applications. 

TSS 440 pipe tracker

The Teledyne TSS 440 pipe detection system has been established for a number of years as the industry standard, providing accurate and reliable survey data, which provides the position of these pipes on or beneath the seabed. 

ScanFish 3D steering

The ScanFish 3D steering allows for both horizontal and vertical movements by using motors on sidepanels and flaps.

OceanEnviro 2.5

The OceanEnviro^TM 2.5 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

WSM6+ 1k Omni transponder

Additional beacon(s) for Sonardyne Mini-Ranger 2 system with WSM6+ transponder package.

WSM6+ 1k Omni transponder

The Wideband Sub-Mini 6 Plus (WSM 6+) is Sonardyne’s latest generation of versatile USBL transponders/responders that support Wideband®2 signals. 

ScanFish Katria excl magnetometers

The ScanFish Katria is an intelligent wide-sweep remotely operated towed vehicle (ROTV) solution for time-efficient magnetometer surveys.

NaviSuite Deep Learning – Pipeline Inspection

Software for automatic data classification and segmentation during pipeline inspection surveys.

VideoRay Pro 4 (multiple options)

The VideoRay Pro 4 ROV incorporates the latest in small ROV design and technology, making it the most advanced, capable and versatile small ROV on the market today.

OceanEnviro 1.7

The OceanEnviro^TM 1.7 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Side Scan Sonar 4125

EdgeTech’s 4125 sidescan sonar system was designed with both the Search & Recovery (SAR) and shallow water survey communities in mind. 

ScanFish Katria excl magnetometers

The ScanFish Katria is an intelligent wide-sweep remotely operated towed vehicle (ROTV) solution for time-efficient magnetometer surveys.

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Sonardyne Micro-Ranger 2

Micro-Ranger 2  from Sonardyne is designed as a shallow water USBL system for tracking of divers and small remotely operated and autonomous underwater vehicles.

ScanFish Katria incl magnetometers

The ScanFish Katria is an intelligent wide-sweep remotely operated towed vehicle (ROTV) solution for time-efficient magnetometer surveys.

NaviSuite Nardoa

Advanced 3D pipeline & cable route inspection software for data acquisition and processing.

ScanFish Katria incl magnetometers

The ScanFish Katria is an intelligent wide-sweep remotely operated towed vehicle (ROTV) solution for time-efficient magnetometer surveys.

VideoRay Pro 5 (multiple options)

The VideoRay Mission Specialist Series (MSS) Pro 5 is designed to handle missions with size, space, weight, and deployment speed constraints, such as infrastructure inspections beyond the reach of divers, search & recovery, exploring the ocean floor up to 305m, and various others.

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Sonardyne Mini-Ranger 2 system with WSM6+ transponder

USBL package for integration with towfish and ROV setups.

Sonardyne Mini-Ranger 2

Mini-Ranger 2 from Sonardyne is a sixth-generation (6G) Ultra-Short BaseLine (USBL) underwater positioning system.