ScanFish III Motor Service

The service is conducted by qualified and highly specialised EIVA service personal at EIVA's facility in Skanderborg, Denmark.

ScanFish Expansion MUX

Extra subsea bottle providing extra communication ports (8) and separate DC-DC modules (max 300W/max 5A per payload).

ScanFish Magnetometer Frame

Fixed Frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers.

Topside rack unit

Topside rack unit for EIVA ScanFish III ROTV range.

USBL – Benthos DAT

The Teledyne Benthos DAT (Directional Acoustic Transponder) is a modified ultra-short baseline (USBL) which uses a broadband component of a typical modem message to form estimates of arrival angle(s). All-in-one: Range, Bearing, and Data Communication.

USBL bracket tube – Ø91 mm

USBL bracket tube Ø91 mm for EIVA ScanFish III ROTV range.

UAT-376 Transponder (multiple options)

The Teledyne Benthos UAT-376 is a general purpose acoustic ranging/bearing device for underwater applications.

USBL bracket tube – Ø70 mm

USBL bracket tube Ø70 mm for EIVA ScanFish III ROTV range.

DRI-267 Dive Ranger Interrogator

The Teledyne Benthos Dive Ranger Interrogator employs advanced acoustic technology to guide users to underwater sites marked with underwater acoustic transponders. 

USBL bracket – universal

USBL bracket – universal for EIVA ScanFish III ROTV range.

ACU-266 Surface Conversion Kit

The ACU-266 allows the operator to locate sand track up to 7 different transponders from the surface when coupled with the DRI-267. 

ScanFish Katria magnetometer cable – inner

Inner magnetometer cable for EIVA ScanFish Katria.

Hydrophone AQ-16

Hydrophone for seismic arrays, ocean bottom cables and general purpose. 

ScanFish Katria magnetometer cable – outer

Outer magnetometer cable for EIVA ScanFish Katria.

Hydrophone AQ-1

Hydrophone for seismic arrays, ocean bottom cables and general purpose. 

ScanFish Katria fairing

Fairing for EIVA ScanFish Katria.

Bottom Finding Pinger BFP-312HP

The high power acoustic bottom finding pinger, used in conjunction with a standard 12 kHz shipboard bathymetric recorder, can be used to monitor the height off bottom of instruments, or sampling equipment being lowered through the water column.

ScanFish Katria pole

Pole for EIVA ScanFish Katria.

Bottom Finding Pinger BFP-312

The bottom finding pinger, used in conjunction with a standard 12 kHz shipboard bathymetric recorder, can be used to monitor the height off bottom of instruments, or sampling equipment being lowered through the water column. 

Termination – Ø6.53

Termination Ø6.53 for EIVA ScanFish III ROTV range.

UV•Xchange™ (multiple options)

The UV•Xchange™ is a subsea module that prevents biofouling during long-term in-situ deployments.

Termination – Ø11.43

Termination Ø11.43 for EIVA ScanFish III ROTV range.

C•Xchange™ calibrated conductivity sensor, right angle, 0–2 mS/cm

The C•Xchange from AML is the oceanographic industry's only field-swappable conductivity sensor.

T•Xchange™ calibrated temperature sensor, -5 to 45 C range

T•Xchange™ is a high performance temperature sensor in a modular form.

C•Xchange™ calibrated sensor, right angle, 0-90 mS/cm

The C•Xchange from AML is the oceanographic industry's only field-swappable conductivity sensor.

POM screw support

POM screw support for EIVA ScanFish III ROTV range.

Sentinel V ADCP bottom frame

Sentinel V ADCP bottom frame

NaviSuite Kuda Multibeam

17-20 Dec 2019 Skanderborg, Denmark

The blended learning course is structured around a general curriculum to give the participants at the course a broad understanding of the EIVA NaviSuite Kuda software for multi-beam echo sounder systems. Attendance at the course requires access to EIVA eLearning.

Smart•X series instrument, P1S2, 6,000 m Ti housing

The Smart•X is the new standard in real-time instruments capable of measuring up to three parameters.

P•Xchange™ calibrated pressure sensor (multiple options)

The P•Xchange™ sensor from AML is the oceanographic industry's only field-swappable pressure sensor.

Turbidity•Xchange™ calibrated turbidity sensor (multiple options)

The Turbidity•Xchange™ sensor from AML is the oceanographic industry’s only field-swappable turbidity sensor head.

Long Ranger / Quartermaster ADCP battery pack

P/N : 757K6051-00 - (WHABPLR)

Long Ranger / Quartermaster ADCP battery pack is specially designed for the battery power supplied systems.

Deflection wire kit

Deflection wire kit for EIVA ScanFish III ROTV range.

Smart•X series instrument, P1S2, right angle AUV mount, 500 m housing

The Smart•X is the new standard in real-time instruments capable of measuring up to three parameters.

Workhorse Sentinel ADCP battery pack

P/N: 757K6023-00 - (WHABP)

Workhorse Sentinel ADCP battery pack is specially designed for the battery power supplied systems.

Flap

Flap for EIVA ScanFish III ROTV range.

Smart•X series instrument, primary only, 500 m housing

The Smart•X is the newer version of the original AML Smart sensor.

Tail guard

Tail guard for EIVA ScanFish III ROTV range.

875-PUB

Teledyne Benthos 875- PUB Pop UP Buoy.

Smart X•Series instrument, P1S2, 500 m housing

The Smart•X is the new standard in real-time instruments capable of measuring up to three parameters.

RiverPro ADCP (multiple options)

Teledyne RD Instruments' RiverPro is a member of a growing family of acoustic doppler current profilers (ADCPs) for inland water resources applications. 

Hatch, painted

Painted hatch for EIVA ScanFish III ROTV range.

Plus•X series instrument, 4-parameter, 5,000 m housing

The Plus•X four-parameter logger is ideal for profiling and multi-parameter studies. Two primary and two secondary Xchange™ sensors can be utilised at once.

Vertical ADCP

The Vertical Acoustic Doppler Current Profiler (Vertical ADCP) is designed for the high-accuracy measurement of water flow, level and velocity profile in open channels, rivers, streams and irrigation channels.

Bottom shell, painted

Painted bottom shell for EIVA ScanFish III ROTV range.

Universal Deck Box UTS-9400

Plus•X series instrument, 4-parameter, 6,000 m housing

The Plus•X four-parameter logger is ideal for profiling and multi-parameter studies.

SV•Xchange™ calibrated sound velocity sensor, 1,375–1,625 m/s

AML XchangeTM is the industry’s only family of field-swappable sensor heads. Each sensor head contains its own embedded calibration, and can be moved from instrument to instrument without impacting field accuracy.

ChannelMaster horizontal ADCP (multiple options)

The compact, flexible and affordable ChannelMaster from Teledyne RD Instruments is a horizontally-oriented Acoustic Doppler Current Profiler (H-ADCP) designed to collect high-accuracy water velocity, stage and discharge data for a wide array of applications.

Top shell, painted

Painted top shell for EIVA ScanFish III ROTV range.

Teledyne Gateway Buoy

NaviSuite Kuda Multibeam

15-18 Oct 2019 Skanderborg, Denmark

The blended learning course is structured around a general curriculum to give the participants at the course a broad understanding of the EIVA NaviSuite Kuda software for multi-beam echo sounder systems. Attendance at the course requires access to EIVA eLearning.

Plus•X series instrument, 5-parameter, 5,000 m housing

The Plus•X five-parameter logger is ideal for profiling and multi-parameter studies. One primary and four secondary Xchange™ sensors can be utilised at once.

SV•Xchange™ calibrated sound velocity sensor, 500–2,000 m/s

AML XchangeTM is the industry’s only family of field-swappable sensor heads. Each sensor head contains its own embedded calibration, and can be moved from instrument to instrument without impacting field accuracy. 

Motor cable 1.8 metre

Motor cable 1.8 metre for EIVA ScanFish III ROTV range.

960 Series ATM-966 (multiple options)

​ATM-960 Series Acoustic Modem for wireless communications in up to 6000m of water. ​Hardcoat anodised aluminum housing, integrated transducer, and no internal battery.

Minos•X series instrument, 6,000 m Ti housing

Minos•X from AML is a small vertical profiler that allows you to change the instrument’s sensor load in the field and on demand.

SV•Xchange™ calibrated sound velocity sensor, 1,100–2,000 m/s

AML XchangeTM is the industry’s only family of field-swappable sensor heads. Each sensor head contains its own embedded calibration, and can be moved from instrument to instrument without impacting field accuracy.

Motor cable 1.2 metre

Motor cable 1.2 metre for EIVA ScanFish III ROTV range.

960 Series ATM-965 (multiple options)

​ATM-960 Series Acoustic Modem for wireless communications in up to 6000m of water. Hardcoat anodised aluminum housing, integrated transducer, and internal battery.

Metrec•X series instrument, P1S4, 6,000 m housing

The Metrec•X is a real-time multi-parameter instrument that allows you to change the instrument's sensor load – in the field and on demand.

920 Series ATM-926 (multiple options)

​ATM-920 Series Acoustic Modem for wireless communications in up to 2000m water. Hardcoat anodised aluminum housing, integrated transducer, and no internal battery.

Micro•X series instrument, primary only, 6,000 m Ti housing

Micro•X is a real-time, single parameter instrument that allows you to field-swap the instrument’s sensor load.

Altimeter cable

Cable for EIVA ScanFish III ROTV range altimeter.

920 Series ATM-925 (multiple options)

​ATM-920 Series Acoustic Modem for wireless communications in up to 2000m water. Hardcoat anodised aluminum housing, integrated transducer, and internal battery.

Minos•X series instrument, 1,000 m Delrin housing

Minos•X from AML is a small vertical profiler that allows you to change the instrument’s sensor load in the field and on demand.

910 Series ATM-916 (multiple options)

​500 Meter Depth Rated Acoustic Modem, externally powered. Composite housing for corrosion resistance, integrated transducer, and no internal battery.

NaviEdit Pro

Editing of overall survey settings, raw sensor data and geodetic settings through import of various types of laser and sonar data, including multi-beam echo sounders and side-scan sonars.

ECO Photosynthetically Active Radiation (PAR) sensor

The ECO-PAR™ sensor provides highly accurate measurements of photosynthetically active radiation (400–700 nm) in all aquatic environments.

Micro•X series instrument, secondary only, 6,000 m Ti housing

Micro•X is a real-time, single parameter instrument that allows you to field-swap the instrument’s sensor load.

910 Series ATM-915 (multiple options)

ATM 910 Series Acoustic Modem for wireless communication in up to 500m of water.

ECO Triplet

The ECO Triplet features an evolutionary design that builds off the bio-wiper and faceplate available on the current ECO line. A copper faceplate covers all but the optics, and a central pivot three-armed copper and neoprene wiper clears the optics prior to sampling

Base•X series instrument, 100 m housing

Base•X is a rugged, shallow water logging instrument. Designed for profiling in coastal waters, the instrument includes a shackle, a sensor cage, and an LED status indicator to simplify deployment preparation.

Doppler Volume Sampler™ (DVS) (multiple options)

Teledyne RD Instruments’ Doppler volume sampler (DVS) is suited for your long-term shallow or deep-water moored current measurement applications.

Pressure sensor

Pressure sensor for the EIVA ScanFish III ROTV range.

ALP-365/EL Pinger

The ALP-365/EL pinger has the same features as the ALP-365, but with extended battery life. Uses six 9V alkaline or lithium batteries, and operates up to 180 days in extreme conditions. The unit is water activated.

ECO FLNTU

This optical sensor is available in combinations of backscattering, turbidity, and fluorescence measurements. ECOs feature optional active anti-fouling and internal batteries for long-term deployments, as well as a 6,000 m depth rating.

BathyMetrec•X series instrument, 6,000 m housing

The AML BathyMetrec•X is the only instrument to combine all the key features of a bathymetric system: a low drift, high accuracy 0.01% Paroscientific Digiquartz pressure sensor.

ALP-365 Pinger

The ALP-365 pinger is an advanced acoustic device that is versatile in the offshore environment. It's rugged aluminum housing ensures long life under extreme conditions. The unit is water activated.

HD Load Multiplier for Deep Releases

Model HD Load Multiplier for Deep Releases from Teledyne Benthos is a secondary arm to provide a 5:1 mechanical advantage when used on any deep release. This 22,600 kilogramme-rated device is used for deployment of anchors and underwater construction applications.

ScanFish Cable Telemetry Kit – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

ECO Scattering Sensor

This optical sensor is available for measurements of backscattering or turbidity at 700 nm. ECOs feature optional active anti-fouling Bio-wiper™ and internal batteries for long-term deployments, as well as a 6,000 m depth rating.

Pinnacle 45 ADCP

The new Pinnacle 45 from Teledyne RD Instruments provides a long range available from a self-contained and real-time ADCP. 

Workhorse Sentinel ADCP (multiple options)

The self-contained Sentinel is Teledyne RD Instruments’ most popular and versatile Acoustic Doppler Current Profiler (ADCP) configuration, boasting thousands of units in operation in over 50 countries around the world.

SM-976 13" (33 cm) with rechargeable lithium ion batteries

The SM-976 is a modem, float, and release all in one. 

Testit

The Teledyne Benthos Testit hand-held acoustic tester enables in-air acoustic testing of all the Teledyne Benthos R-Series acoustic releases prior to deployment.

ScanFish Cable Telemetry Kit – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

C-Star Transmissometer

The C-Star transmissometer has a novel monolithic housing with a highly intgrated opto-electronic design to provide a low cost, compact solution for underwater measurements of beam transmittance.

Workhorse Quartermaster ADCP (multiple options)

Teledyne RDI's 150 kHz QuarterMaster ADCP has been designed to fill a gap between the company's 300 kHz Workhorse ADCPs and 75 kHz Workhorse Long Ranger. This unit offers an extended current profiling range over higher frequency units, in the proven Long Ranger configuration.

SM-975 17" (43 cm) with dual battery

Combined float, release, and modem in one package.

Releaseit Shallow Water Deck Unit

The Releaseit Shallow Water Deck Unit and dunking transducer from Teledyne Benthos enables communications and acoustic release functionality when used with any of Teledyne Benthos’ R-Series acoustic releases deployed in shallow water environments. 

NaviModel Analyser

Basic processing, visualisation and analysis of data in 2D, 3D and 4D.

WETStar Fluorometer

Provides calibrated, high-resolution (60 Hz signal and 1 Hz average) chlorophyll-a measurement of mechanically stimulated bioluminescence to assess water column ecosystem dynamics.

ScanFish III Service

Service of ScanFish III

Workhorse Monitor ADCP (multiple options)

The Workhorse Monitor is Teledyne RD Instruments™ most popular direct-reading Acoustic Doppler Current Profiler.

SM-975 13” (33 cm)

Combined float, release, and modem in one package.

R500 Acoustic Transponding Release

The R500 Acoustic Release from Teledyne Bethos for shallow water operations ranges up to 500 metres depth. This acoustic release is based on the field-proven technology previously introduced in the R2K and R12K acoustic releases. 

NaviModel Producer

Full software solution for data processing, cleaning, modelling and reporting.

ScanFish XL

Multi-purpose, high-payload capacity ROTV for oceanographic surveys

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

ECO Fluorometers

The Environmental Characterization Optics (ECO) series of single-channel fluorometers delivers both high resolution and wide ranges across our entire line of parameters using 13 bit digital processing. The ECO series excels in biological monitoring and dye trace studies.

Workhorse Mariner ADCP (multiple options)

The Mariner offers all of the benefits of RDI's traditional ADCP products in a compact package designed specifically for coastal hull-mount applications. The unit is easily integrated into the vessel's DGPS input to provide integrated ADCP readings with precise position information.

ScanFish 3D steering

Enhance the manoeuvrability and flight path capabilities of ScanFish.

Transponders 13” (33 cm), TR-6001

R2K Acoustic Transponding Release

​The new next generation Model R2K Mid-Water Acoustic Transponding release represents the latest in Teledyne Benthos acoustic release technology.  With leading-edge features, this line establishes itself as the most technologically sophisticated in its class.

BlueROV2

The BlueROV2 is an affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s a good choice for ROV inspections, research, and adventuring. 

OceanEnviro 10.4

The OceanEnviro^TM 10.4 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SBE 37-IM/IMP/IMP-ODO MicroCAT

The SBE 37-IM/IMP/IMP-ODO MicroCAT is a high-accuracy conductivity and temperature (pressure optional) recorder with integrated Inductive Modem (IM) interface, internal batteries, memory, optional pump, and optional optical dissolved oxygen sensor. 

WQM Water Quality Monitor

Sea-Bird Scientific brings offshore research-grade measurement technology to inshore and estuarine research through ocean observing applications. The WQM incorporates Sea-Bird Scientific's fluorometer-turbidity and CTD sensors, providing temperature, salinity, depth, dissolved oxygen, chlorophyll fluorescence, turbidity and backscattering data.

Altimeter

Altimeter for the EIVA ScanFish III ROTV range.

Workhorse Long Ranger ADCP (multiple options)

Provides the longest profiling range available from a self-contained ADCP.  Recommended for gathering detailed data on seasonal and annual current structure fluctuations for scientific research and offshore oil and gas applications. 

Transponders 17” (43 cm), TR-6001

R12K Acoustic Transponding Release

The R12K Deep Sea Acoustic Transponding Release is the first product in the Teledyne Benthos release line to benefit from a new electronics architecture, that provides new features and establishes the R12K as the most technologically sophisticated release in its class. 

VideoRay Mission Specialist Defender

The VideoRay Mission Specialist Defender ROV (remotely operated vehicle) utilises a system of interchangeable, modular components that communicate through a single, intelligent network. 

Smart•X series instrument, primary only, 500 m housing

The Smart•X is the newer version of the original AML Smart sensor.

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SBE 49 FastCAT CTD Sensor

The SBE 49 FastCAT is an integrated CTD sensor intended for use as a modular component in towed vehicles, ROVs, AUVs, or other autonomous platforms that can supply DC power and acquire serial data.

SeapHOx™ V2 Ocean CT(D)-pH-DO Sensor

Both the SeapHOx™ V2 and 2000 m Deep SeapHOx™ V2 allow for integrated measurements of conductivity, temperature, depth, dissolved oxygen, salinity, and pH. The pumped flow path and anti-fouling technology can extend deployment time.

ScanFish Magnetometer Frame

Fixed frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers. 

Workhorse horizontal ADCP 300kHz (multiple options)

Teledyne RD Instruments’ 300-kilohertz Workhorse Horizontal Acoustic Doppler Current Profiler (H-ADCP) is an acoustic monitoring system that 'looks' out horizontally from its mounting structure to measure near-surface water currents and optional multi-directional waves. 

Transponders 17” (43 cm), XT-6001 with Titanium VPT installed

ToughBoy Panchax 1.2 with 300 kHz ADCP

Wave buoy model that comes standard with a 300 kHz ADCP

VideoRay Mission Specialist Series (MSS)

The VideoRay Mission Specialist ROV Series (MSS) utilises a system of interchangeable, modular components that communicate through a single, intelligent network.

Valeport miniSVS Sound Velocity Sensors

The Valeport miniSVS Sound Velocity Sensors use state-of-the-art digital 'time of flight' technology to provide low-noise, high-accuracy, best-resolution sound velocity data available.

ChannelMaster horizontal ADCP (600 kHz)

The compact, flexible and affordable ChannelMaster from Teledyne RD Instruments is a horizontally-oriented Acoustic Doppler Current Profiler (H-ADCP) designed to collect high-accuracy water velocity (at ranges from 1 to 300 metres), stage and discharge data for a wide array of applications.

Cormac 3

MacArtney Cormac winches are modular and self-contained in protective frames. They are constructed from glass-blasted AISI 304 stainless steel and require minimal maintenance.

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SBE 25plus Sealogger CTD

The SBE 25plus Sealogger is the ideal research-quality CTD profiler for coastal, estuarine, and deep-water deployments.

Deep SUNA Ocean Nitrate Sensor

​Based on the proven MBARI-ISUS nitrate sensor, Deep SUNA provides real time, chemical-free nitrate calculations in deep ocean environments using Sea-Bird Scientific’s advanced UV absorption technology.

Sentinel V ADCP (multiple options)

The Teledyne RD Instruments Sentinel V is loaded with features and capabilities destined to redefine and revolutionise your current profiling activities.

ATTU cable

Transponders 13” (33 cm), XT-6001 with Titanium VPT installed

Spherical ADCP Buoy (multiple options)

DeepWater Buoyancy’s ADCP Buoys are designed to outperform and outlast conventional mooring flotation. Available with depth ratings to 6000 meters, they require minimal maintenance and are extremely durable under the most rigorous deepwater conditions.

Vector V104™ GPS Compass (multiple options)

The Vector V104S™ GPS Compass offers superior navigation, including accurate heading and position performance.

ToughBoy Panchax 1.2 with 600 kHz ADCP

Wave buoy model that comes standard with a 600 kHz ADCP

ScanFish Rocio

The ScanFish Rocio is a multi-purpose ROTV (remotely operated towed vehicle) for oceanographic surveys.

VideoRay ROV maintenance & repair kit

EIVA can supply spare parts and maintenance and repair kits for VideoRay Scout, Explorer and Pro 4 ROV series.

Smart•X series instrument, primary only, 500 m housing

The Smart•X is the newer version of the original AML Smart sensor.

910 Series ATM-915 (multiple options)

ATM 910 Series Acoustic Modem for wireless communication in up to 500m of water.

ATTU-24

ScanFish Operator Course

28 Oct – 1 Nov 2019 Skanderborg, Denmark

What better way to deepen your knowledge and understanding of ScanFish, improve your operator skills and enhance your technical abilities to service ScanFish than attending a course designed and instructed by EIVA's ScanFish team?

ScanFish 3D steering

The ScanFish 3D steering allows for both horizontal and vertical movements by using motors on sidepanels and flaps.

ChannelMaster horizontal ADCP (600 kHz)

The compact, flexible and affordable ChannelMaster from Teledyne RD Instruments is a horizontally-oriented Acoustic Doppler Current Profiler (H-ADCP) designed to collect high-accuracy water velocity (at ranges from 1 to 300 metres), stage and discharge data for a wide array of applications.

OceanEnviro 2.5

The OceanEnviro^TM 2.5 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SBE 911plus CTD

The SBE 911plus CTD is the primary oceanographic research tool used by the world’s leading institutions, providing 24 Hz sampling with an SBE 9plus CTD Unit and SBE 11plus V2 Deck Unit.

SeaFET V2 Ocean pH sensor

The SeaFET™ V2 is the next generation pH sensor. The sensing element is an ion sensitive field effect transistor (ISFET), the advantages of the ISFET include robustness, stability and precision that make it suitable for ocean pH measurement at low pressure,  thus helping achieve a greater understanding of the state of acid/base equilibria in seawater.

StreamPro ADCP with compass and tablet PC

ATTU-24

Transponders 17” (43 cm), XT-6001

ToughBoy Panchax 1.2 with 1200 kHz ADCP

Wave buoy model that comes standard with a 1200 kHz ADCP

VideoRay Pro 4 (multiple options)

The VideoRay Pro 4 ROV incorporates the latest in small ROV design and technology, making it the most advanced, capable and versatile small ROV on the market today.

Programmable Sonar Altimeter PSA-916

OceanEnviro 1.7

The OceanEnviro^TM 1.7 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Minos•X CTD/SVP sensor, 1,000 m Delrin housing

Minos•X from AML is a small vertical profiler that allows you to change the instrument’s sensor load in the field and on demand.

ATTU-16

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SBE 19plus V2 SeaCAT Profiler CTD

The SBE 19plus V2 SeaCAT measures conductivity, temperature, and pressure at 4 scans/sec (4 Hz) and provides high accuracy and resolution, reliability, and ease-of-use for a wide range of research, monitoring, and engineering applications.

SBE 55 Pylon with Plastic Housing, Aluminum Endcap, XSG Connector

Small, lightweight, robust water sampler package with magnetically activated lanyard release latch is compatible with most Sea-Bird CTDs. Three or six 4-liter bottles, real time or autonomous operation. 

SBE 18 pH Sensor

The SBE 18 pH Sensor uses a pressure-balanced glass-electrode /Ag/AgCl-reference pH probe to provide in-situ measurements at depths to 1200 metres. 

Sentinel V ADCP bottom frame

Sentinel V ADCP bottom frame

SBE 16plus V2 SeaCAT CT(D) (multiple options)

The SBE 16plus V2 SeaCAT is a high-accuracy conductivity and temperature (pressure optional) recorder designed for moorings or other long-duration, fixed-site deployments.

SBE 32 Carousel Water Sampler (multiple options)

The SBE 32 Carousel Water Sampler has been extensively deployed throughout the world’s oceans, where it has built a reputation for reliability and ease of use. 

RiverRay Phased Array 600 kHz

ToughBoy Panchax 1.2 without fitted ADCP

Wave buoy model that comes standard without pre-fitted ADCP

ATTU-16

Transponders 13” (33 cm), XT-6001

Sentinel V20 ADCP

The Teledyne RD Instruments Sentinel V20 has a profiling range of 20 metres and is loaded with features and capabilities destined to redefine and revolutionise your current profiling activities. 

VideoRay Pro 5 (multiple options)

The VideoRay Mission Specialist Series (MSS) Pro 5 is designed to handle missions with size, space, weight, and deployment speed constraints, such as infrastructure inspections beyond the reach of divers, search & recovery, exploring the ocean floor up to 305m, and various others.

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SBE 43 Dissolved Oxygen Sensor

The SBE 43 and SBE 43F are individually calibrated, high-accuracy oxygen sensor to assist in critical hypoxia and ocean stoichiometric oxygen chemistry research on a variety of profiling and moored platforms.