ViperFish

ViperFish is an ROTV total solution for high-resolution imaging – Autonomous USV operations – Survey narrow, hard to reach areas

ScanFish Katria excl magnetometers

The ScanFish Katria is an intelligent wide-sweep remotely operated towed vehicle (ROTV) solution for time-efficient magnetometer surveys.

ScanFish Katria incl magnetometers

The ScanFish Katria is an intelligent wide-sweep remotely operated towed vehicle (ROTV) solution for time-efficient magnetometer surveys.

Equinox

Multi-aperture sidescan sonar towed with a ScanFish remotely operated towed vehicle for UXO operations.

ScanFish Rocio

The ScanFish Rocio is a multi-purpose ROTV (remotely operated towed vehicle) for oceanographic surveys.

ScanFish Tropheus

The ScanFish Tropheus is a terrain-following ROTV especially designed for UXO detection

ScanFish 3D steering

Enhance the manoeuvrability and flight path capabilities of ScanFish.

ScanFish Magnetometer Frame

Fixed Frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers.

ScanFish Service – 2D ROTV

Highly specialised EIVA service personnel check your ScanFish for any damages or wear which it may have sustained. We recommend you send your ScanFish for service yearly.

ScanFish Service – 3D ROTV

Highly specialised EIVA service personnel check your ScanFish for any damages or wear which it may have sustained. We recommend you send your ScanFish for service yearly.

2D ScanFish Motor Service

Highly specialised EIVA service personnel check your ScanFish motor, motor controller and housing for any damages or wear which it may have sustained.

3D ScanFish Motor Service

Highly specialised EIVA service personnel check your ScanFish motor, motor controller and housing for any damages or wear which it may have sustained.

ScanFish 3D steering ready option

With this option, a standard ScanFish unit will be fitted with a controller equipped with hardware and connectors required for the 3D side panels and thus the 3D steering option.

ScanFish Cable Telemetry Kit 1000 W – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

ScanFish Cable Telemetry Kit 1000 W – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

ScanFish Cable Telemetry Kit 600 W – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

ScanFish Cable Telemetry Kit 600 W – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

G-882 Marine Magnetometer

The Geometrics G-882 caesium-vapour marine magnetometer is a low-cost, compact system designed for professional surveys in shallow or deep water. 

Magnetometer cable and tow points

EIVA can supply magnetometer cables in any length, with or without mounted towpoints.

ROTV self-locking cable termination – Ø11.43

Self-locking termination Ø11.43 for EIVA's ROTV ranges.

ScanFish moulded termination – Ø11.43

Moulded termination Ø11.43 for EIVA ScanFish ROTV range.

ScanFish moulded termination – Ø6.53

Moulded termination Ø6.53 for EIVA ScanFish ROTV range.

Pressure sensor

Pressure sensor for the EIVA ScanFish ROTV range.

Altimeter cable

Cable for EIVA ScanFish ROTV range altimeter.

Motor cable 1.2 metre

Motor cable 1.2 metre for EIVA ScanFish ROTV range.

Motor cable 1.8 metre

Motor cable 1.8 metre for EIVA ScanFish ROTV range.

Top shell, painted

Painted top shell for EIVA ScanFish ROTV range.

Bottom shell, painted

Painted bottom shell for EIVA ScanFish ROTV range.

Hatch, painted

Painted hatch for EIVA ScanFish ROTV range.

3D motor

3D motor for the EIVA ScanFish ROTV range.

2D motor incl flap shells

2D motor including flap shells for the EIVA ScanFish ROTV range.

2D motor excl flap shells

2D motor excluding flap shells for the EIVA ScanFish ROTV range.

ScanFish Katria pole

Pole for EIVA ScanFish Katria.

ScanFish Katria fairing

Fairing for EIVA ScanFish Katria.

ScanFish Katria magnetometer cable – outer

Outer magnetometer cable for EIVA ScanFish Katria.

ScanFish Katria magnetometer cable – inner

Inner magnetometer cable for EIVA ScanFish Katria.

Deflection wire kit

Deflection wire kit for EIVA ScanFish ROTV range.

POM screw support

POM screw support for EIVA ScanFish ROTV range.

Wire bolt

Wire bolt for EIVA ScanFish ROTV range.

USBL bracket – universal

USBL bracket – universal for EIVA ScanFish ROTV range.

USBL bracket tube – Ø70 mm

USBL bracket tube Ø70 mm for EIVA ScanFish ROTV range.

USBL bracket tube – Ø91 mm

USBL bracket tube Ø91 mm for EIVA ScanFish ROTV range.

ScanFish Expansion MUX

Extra subsea bottle providing extra communication ports (8) and separate DC-DC modules (max 300W/max 5A per payload).

Rack computer

Topside rack unit – 600 W

Spare topside rack unit for ScanFish, for power and communications over coax cable.

Topside rack unit – 1000 W

Spare topside rack unit for ScanFish, for power and communications over coax cable.