EIVA A/S

To use this site, please enable javascript

  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite
  • NaviPac Lite

Navigation and positioning

NaviPac provides positioning and navigation features for surface and/or subsea vehicles. It comes in four variants:

  • NaviPac Lite, the variant you see here
  • NaviPac Pro, the most elaborate variant
  • NaviPac Single User, which offers all the features of NaviPac Pro, limited to a single network/remote client and a single subsea object
  • NaviPac Tug, which is dedicated to the tug boat during anchor handling operations, rig moves and similar jobs

Scroll down to check out an overview comparing what you get with the different variants.

NaviPac Lite is tailored to vessel-based surveys with a single beam echo sounder. It thereby allows you to benefit from the advanced features of NaviPac without compromising your budget if your setup does not include lasers or additional sonars.

You get the same features as NaviPac Pro in terms of quality control, display options and navigation management, minus the features dedicated to laser, side-scan sonar and multi-beam echo sounder data. Interface is limited to two GPS receivers or similar, one gyro, one motion sensor, one single beam echo sounder and one output for annotation, etc.

You already have products in your My EIVA basket

This product cannot be added to your basket as you already have products in your My EIVA basket.

excl VAT, excl shipping fee
Get in touch
Delivery time:   A few minutes

As soon as your details are validated, you will receive a licence activation key for any purchased subscriptions by email and with any purchased permanent licence a physical dongle will be shipped to you.

Key features and benefits

  • General visualisation tools

    General visualisation tools

    NaviModel and NaviPac share the same 3D engine, and therefore the same powerful 3D visualisation features. Data can be visualised in 2D, 3D, side view or by time.

    Learn more

    General visualisation features

    NaviModel and NaviPac share the same 3D engine, and therefore the same powerful 3D visualisation features. Data can be visualised in 2D, 3D, side view or by time.

    3D seabed terrain 

    Seabed terrain can be visualised in a 3D environment.

    3D seabed terrain

    Multiple Map Views

    Multiple Map Views are available.  Each individual Map View window can be configured separately to display only the information required.

    Background Maps 

    Background Web Map Service (WMS) maps can be displayed.

    Background Maps

    Import 3D models 

    3D models can be imported into NaviModel (drag and drop into the Map View window).

    Import 3D models

    Link 3D models to live objects 

    3D models can be linked to any live objects (Vessel, ROV, Scanfish etc).

    Link 3D models to live objects

    2D, 3D and side-view displays 

    2D, 3D or Side views allows the user to quickly change the view facilitating better data interpretation.

    3D, 2D and side-view displays

    Visibility Slider 

    Visibility slider allows users to compare different DTM’s quickly.  This enables comparison over time or between different data processing methods.

    Visibility slider

    Control colours, lights, details 

    DTM light and palette settings can be changed at any time.

    Control colours, lights, details

    Profile views 

    The following profile views are available:
     
    • Cross Profile
    • Long Profile
    • Quick Profile
    • X & Y Axis Profile
    • View Profile
    Profile views

    Create fly-through videos 

    Fly-through videos can be created for project or promotional presentations.

    Create fly-through videos
  • Navigation and routes

    Navigation and routes

    NaviPac is an integrated navigation and data acquisition software solution that includes surface and subsea navigation, route and waypoint planning, live tracking and piloting.

    Learn more

    Navigation and routes features

    Navigation and data acquisition are integrated in this software solution. Efficiently and easily navigate surface and subsea vessels using intuitive tools to plan routes and waypoints, track or pilot a vessel and more.

    Display live position of a vehicle

    NaviSuite supports display of vehicle data based on the NaviPac data feed. You can display the main vessel along with one subsea vehicle, such as an ROV or ROTV, on an unlimited number of local and remote displays. The data can be shown graphically in multiple map views.

    Live position of multiple objects

    AIS tracks

    NaviSuite supports integration with AIS receivers. The data can be shown in a dedicated AIS window and overlaid in the NaviPac window. You can perform, read and utilise vessel dimension information.

    AIS tracks

    Display north-up, heading-up, route-up

    Each Map View can be designed and controlled individually when it comes to content, overlays and layout. Map Views can be 2D, 3D or side-views, and orientation can be user defined, north-up, vehicle up or line up.

    Display north-up, heading-up, route-up

    Manual waypoint drawing

    NaviSuite supports a series of runline and waypoint formats including our own RLX/WPT format, ad generic ASCII readers. You can also draw lines and points directly in the Map View.

    Manual waypoint drawing

    Various runline patterns (parallel, cross, star)

    You can inherit multiple lines based on the base line defined, such as parallel or cross lines to get an optimal route plan.

    Various runline patterns (parallel, cross, star)

    Vehicle control panel for multiple vehicle runlines and display DOL

    Assignment of lines and waypoints are handled through the dedicated Vehicle Control view, as you may control multiple vehicles simultaneously. Each controlled vehicle will be available as distance offline indicator (DOL/DCC) and various runline information (along line, target ETA etc).

    Vehicle control panel for multiple vehicle runlines and display DOL

    Distance to waypoint

    Waypoints are handled in a similar manner to runlines, as assignment of the waypoint is done in the Vehicle Control View. Hereafter, an artificial runline is created from the vehicle to the point and NaviPac monitors the range/bearing to the destination. and can a,.o. feed that into autopilots and DP systems.

    Distance to waypoint

    Multi-object live range/bearing

    In NaviSuite, you may pair live vessels and monitor the range/bearings between them for online display as live data and range information on Map Views.

    Multi-object live range/bearing

    Auto-pilot (NMEA) control

    When using runlines and waypoints you may connect NaviPac to autopilot systems using e.g., standard NMEA formats and pass cross-track error and destination waypoints on to the equipment.

    Auto-pilot (NMEA) control

    DataUnits

    NaviSuite supports use of other data units in addition to metric. The unit is selected in the project settings and all definition fields are then assumed to be in the selected data unit. 
    NaviSuite will follow the selected data unit, but you may, by using a simple keystroke, toggle between metric and data unit if required.
    Data recording will still be metric to guarantee data integrity, but data outputs can be selected freely.

    DataUnits
  • Sensor interfacing and recording

    Sensor interfacing and recording

    Many different sensors can be interfaced and integrated in both NaviScan and NaviPac.

    Learn more

    Sensor interfacing and recording features

    Many different sensors can be interfaced and integrated in both NaviScan and NaviPac.

    Surface positioning and motion (GPS, Gyro, IMU)

    Setting up an entire vessel based project in NaviPac is easy performed using intuitive graphical definition tools. The video covers basic project definition, geodetics and vessel navigation setup.

    Surface positioning and motion (GPS, Gyro, IMU)

    SBE - single beam echo sounder

    Single beam echo sounders and other single source data suppliers can easily be interfaced in NaviPac, either via standard drivers or enhanced user-configurable drivers. Data will be available for display in both Helmsman’s Display and DataMon. Single source data can be shown as points clouds in the HMD – and you can automatically derive DTMs out of it.

    SBE single beam echo sounders
  • Sensor processing

    Sensor processing

    NaviEdit can be used to recalculate data very quickly and where our sensor processing takes place. Here we change offsets, C-O’s, mounting angles, apply tide, apply SVP, de-spike sensors, improve object positioning, Kalman filtering, remove swell etc.

    Learn more

    Sensor processing features

    NaviEdit can recalculate data very quickly and where sensor processing takes place. Here we change offsets, C-O’s, mounting angles, apply tide, apply SVP, de-spike sensors, improve object positioning, Kalman filtering, remove swell etc.

    Surface positioning and motion (GPS, Gyro, IMU)

    NaviEdit Header Editor allows the user to check the vessel setup.

    NaviEdit Data Editor allows the user to view and QC sensor data via a series of graphical displays.

    Surface positioning and motion (GPS, Gyro, IMU)
  • References

    References

    NaviPac offers advanced and intuitive tools for navigation and surveys, helping customers within survey and constructions industries.

    Learn more

    NaviModel references

    'This past season I have been using NaviPac 4.5 for surveying and I more than approve of this latest version! NaviPac is truly the best navigation and positioning software on the market. As a surveyor, there are many tools and features I love to use in NaviPac. A quick tip for other NaviPac users, I have saved time on my tasks by configuring shortcuts to quickly access the tools I use most.'

    Jeogan Nascimento
    Freelance online surveyor and survey engineer
  • Optional extra services and special offers

    Optional extra services and special offers

    EIVA offers a number of services for our NaviSuite software users.

    Learn more

    Optional extra services and special offers

    Get the most out of your software

    EIVA offers a number of services for our NaviSuite software users. These include:

    Also, we have a number of special offers:

Product comparison

 

NaviPac Lite

NaviPac Tug

NaviPac Single UserNaviPac Pro
Interfacing   

 

Surface navigation

Max 2Max 2xx

Gyro

Max 1Max 1xx
Motion sensorMax 1Max 1xx
DVL  xx
Underwater positioning: USBL, LBL and INS  One object with one data source*x
Remote positioning: GPS, remote systems xOne object with one data source*x
AIS inputxxxx
Echo sounder etc.xxxx
Pipe and cable tracker  xx
Magnetometer  xx
Bathy sensor  xx
Annotationxxxx
Data outputMax 1xxx
GPS time synchronisation  xx
ATTU interfacing and time synchronisationxxxx
Multi-beam echo sounder, laser and sonar integration via NaviScan  xx
LiDAR navigation  xx
2D seismic streamer and tail buoy option   x
Rig move and tug management option available as add-on licence   x
     
Calibration    
Position fixxxxx
Gyroxxxx
Motion sensorxxxx
Remote gyro  xx
USBL  xx
DVL  xx
     
Display and tools    
3D and 2D displayxxxx
Remote display Max 1Max 1x
Real-time DTM (multi-beam echo sounder)   xx
Real-time data cleaning (multi-beam echo sounder)   xx
Real-time DTM (single beam echo sounder) x xx
Survey planning x xx
Runline usagex xx
Barge lines   x
Great-circle/rhumb lines  xx
Line overlength   x
Enhanced data designer (DataMon)xxxx
Geodetic calculatorxxxx
User-defined inputxxxx
User-defined output  xx
Telemetry xxx
Eventingx xx
Distance shooting  xx
Collision detection xxx
UNESCO depth calculations  xx
User-configurable alarm monitoringxxxx
Built-in simulatorx xx
Remote monitor   x
Remote master control   x
     
Maps    
Geocoded imagesxxxx
Webserver interface (eg Bing)x xx
ACAD etcxxxx
Vector drawingsxxxx
WMS mapsxxxx
     
Data recordings    
Survey data recordingx xx
Black box recordingxxxx
User-configurable data recordingsxxxx
Multi-beam echo sounder, sonar and laser recording via NaviScan  xx
UKOOA seismic data (P2/94)   x
     
New features introduced with NaviPac 4    
Comparison of DTMs  xx
Point cloud and multi-beam echo sounder data cleaning (spike shooting, histogram)  xx
Volume calculation  xx
Rock dump and trench design  xx
Live video viewing and recording  xx
Automatic runline coverage assist and run-in calculation  xx
Real-time point cloudsx xx

* Either one underwater or one remote object per licence