NaviSuite processing with pipeline inspection

15-18 Jun 2021 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of the relevant NaviSuite software applied for Processing with pipeline inspection. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

NaviPac 4.5 Rigmove and tug management

8-10 Jun 2021 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of NaviPac 4.5 and the rig move and barge option. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

Topside rack unit – 1000 W

Spare topside rack unit for ScanFish III, for power and communications over coax cable.

NaviSuite navigation, acquisition and processing

31 May – 4 Jun 2021 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of the relevant NaviSuite software applied for navigation, acquisition and processing thus including NaviPac Pro, NaviScan, NaviEdit and NaviModel. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

NaviSuite Data Processing

26-29 Apr 2021 Virtual training

This course will be conducted via Microsoft Teams and will be held in Brazilian Portuguese. The blended learning course is structured around a general curriculum with the aim of giving the trainees a broad understanding of the NaviSuite software and make them confident in using these software solutions on a vessel. Attendance at the course requires access to EIVA eLearning.

ScanFish Cable Telemetry Kit 1000 W – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

ScanFish Cable Telemetry Kit 1000 W – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

NaviSuite processing with pipeline inspection

26-29 Apr 2021 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of the relevant NaviSuite software applied for Processing with pipeline inspection. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

NaviPac 4.5 Rigmove and tug management

20-22 Apr 2021 Virtual training

This course will be conducted via Microsoft Teams and will be held in English. The virtual training course is structured around a general curriculum with the aim of giving the trainees an understanding of the setup and practical usage of NaviPac 4.5 and the rig move and barge option. To secure a common understanding of the concepts behind as well as the software, we recommend that the relevant EIVA eLearning modules are passed prior to the start of the course. 

ScanFish III 3D steering ready option

With this option, a standard ScanFish unit will be fitted with a controller equipped with hardware and connectors required for the 3D side panels and thus the 3D steering option.

ScanFish III Motor Service

The service is conducted by qualified and highly specialised EIVA service personnel at EIVA's facility in Skanderborg, Denmark.

Rack computer

ScanFish Expansion MUX

Extra subsea bottle providing extra communication ports (8) and separate DC-DC modules (max 300W/max 5A per payload).

ScanFish Magnetometer Frame

Fixed Frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers.

Topside rack unit – 600 W

Spare topside rack unit for ScanFish III, for power and communications over coax cable.

USBL bracket tube – Ø91 mm

USBL bracket tube Ø91 mm for EIVA ScanFish III ROTV range.

USBL bracket tube – Ø70 mm

USBL bracket tube Ø70 mm for EIVA ScanFish III ROTV range.

USBL bracket – universal

USBL bracket – universal for EIVA ScanFish III ROTV range.

ScanFish Katria magnetometer cable – inner

Inner magnetometer cable for EIVA ScanFish Katria.

ScanFish Katria magnetometer cable – outer

Outer magnetometer cable for EIVA ScanFish Katria.

ScanFish Katria fairing

Fairing for EIVA ScanFish Katria.

ScanFish Katria pole

Pole for EIVA ScanFish Katria.

Termination – Ø6.53

Termination Ø6.53 for EIVA ScanFish III ROTV range.

Termination – Ø11.43

Termination Ø11.43 for EIVA ScanFish III ROTV range.

Wire bolt

Wire bolt for EIVA ScanFish III ROTV range.

POM screw support

POM screw support for EIVA ScanFish III ROTV range.

Deflection wire kit

Deflection wire kit for EIVA ScanFish III ROTV range.

Flap

Flap for EIVA ScanFish III ROTV range.

Tail guard

Tail guard for EIVA ScanFish III ROTV range.

Hatch, painted

Painted hatch for EIVA ScanFish III ROTV range.

Bottom shell, painted

Painted bottom shell for EIVA ScanFish III ROTV range.

Top shell, painted

Painted top shell for EIVA ScanFish III ROTV range.

Motor cable 1.8 metre

Motor cable 1.8 metre for EIVA ScanFish III ROTV range.

Motor cable 1.2 metre

Motor cable 1.2 metre for EIVA ScanFish III ROTV range.

Pathfinder Doppler Velocity Log

The Teledyne RD Instruments Pathfinder 600kHz array transducer is ultra-compact and designed with reduced size and weight to accommodate a wide array of vehicles, with minimal impact on system payload and reduced drag on the vehicle. 

Altimeter cable

Cable for EIVA ScanFish III ROTV range altimeter.

Workshop Licence

The optimal tool if you wish to have a test platform for NaviScan/NaviPac Pro at your company’s premises.

NaviScan

Acquire data from all major pipe/cable trackers and sonars on the market.

NaviEdit Pro

Editing of overall survey settings, raw sensor data and geodetic settings through import of various types of laser and sonar data, including multi-beam echo sounders and side-scan sonars.

Pressure sensor

Pressure sensor for the EIVA ScanFish III ROTV range.

Workflow Manager – Onboard Computer

AUV/USV integration of Workflow Manager features.

ScanFish Cable Telemetry Kit 600 W – excl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

Workflow Manager – Server

Configurable workflow process automation tool allowing for automation of the small steps you normally go through when processing subsea data.

NaviPac Single User

Navigation and positioning software offering all the features of NaviPac Pro, limited to a single network/remote client and a single subsea object.

ScanFish Cable Telemetry Kit 600 W – incl subsea housing

Off-the-shelf power and communications solution for subsea sensors or other types of equipment deployed from a vessel via a long cable.

NaviPac Lite

Navigation and positioning software tailored to vessel-based surveys with a single beam echo sounder.

ScanFish III Service

Service of ScanFish III

NaviModel Analyser

Basic processing, visualisation and analysis of data in 2D, 3D and 4D.

NaviSuite Kuda Acquisition Pro

Affordable software with deep feature list for hydrographic data acquisition with unlimited complex underwater objects and remote displays.

Wayfinder DVL

The new Wayfinder DVL from Teledyne RD Instruments, at just 10 cm x 10 cm x 7 cm, is the smallest DVL Teledyne has designed, making it ideally suited for micro ROVs. 

NaviSuite Kuda Acquisition

Affordable software with deep feature list for hydrographic data acquisition.

NaviPac Pro

The most elaborate NaviPac variant for navigation information and positioning calculations.

NaviModel Producer

Full software solution for data processing, cleaning, modelling and reporting.

ScanFish XL

Multi-purpose, high-payload capacity ROTV for oceanographic surveys

Vector V113 GPS Compass

Experience the IMO Wheelmarked Vector V113 Hemisphere GPS Compass for its superb heading and positioning performance. 

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Nano transponder with depth sensor

Sonardyne’s smallest USBL transponder with compatibility with the Ranger 2 USBL topside systems; Micro, Mini and Standard.

ScanFish 3D steering

Enhance the manoeuvrability and flight path capabilities of ScanFish.

Vector V133™ Smart Antenna

Experience the Vector V133™ Hemisphere Smart Antenna for its precise heading accuracy and decimeter positioning performance.

NaviSuite Kuda Single Beam Acquisition and Processing

Affordable software with deep feature list for single beam echo sounder hydrographic data acquisition and processing.

Workhorse Navigator Doppler Velocity Log 1200 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

Tritech MicronNav USBL tracking system

The MicronNav system is an innovative Ultra-Short Base Line (USBL) positioning system designed for small vehicles. 

V111 GPS Compass

The V111 GPS Compass is a navigator that utilises the Crescent Vector II technology, which brings a series of new features to the V111 including heave, pitch and roll output, and more robust performance. 

BlueROV2

The BlueROV2 is an affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s a good choice for ROV inspections, research, and adventuring. 

OceanEnviro 10.4

The OceanEnviro^TM 10.4 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Altimeter

Altimeter for the EIVA ScanFish III ROTV range.

Rovins

iXblue’s Rovins is a survey-grade full-featured Inertial Navigation System (INS) for water depths up to 3,000 m. 

ScanFish Tropheus

The ScanFish Tropheus is a terrain-following ROTV especially designed for UXO detection

Vector V123™ Smart Antenna

Experience the Vector V123™ Hemisphere Smart Antenna for its precise heading accuracy and decimeter positioning performance.

VideoRay Mission Specialist Defender

The VideoRay Mission Specialist Defender ROV (remotely operated vehicle) utilises a system of interchangeable, modular components that communicate through a single, intelligent network. 

Digibar S

The rugged all-stainless-steel Digibar S was designed for untethered sound velocity casting.

Workhorse Navigator Doppler Velocity Log 600 kHz

Teledyne RDI’s highly acclaimed Doppler Velocity Log (DVL) provides precise velocity and altitude updates for a wide variety of underwater tasks.

Octans Subsea

Octans 3000 is a subsea survey-grade gyrocompass and complete motion sensor for water depths up to 3,000 m.

V101 GPS Compass

The V101 GPS Compass is a navigator that utilises the Crescent Vector II technology, which brings a series of new features to the V101 including heave, pitch and roll output, and more robust performance. 

NORBIT iWBMSh

This compact, high resolution, tightly integrated, broadband multi-beam sonar solution from NORBIT offers a curved array, a real-time sound velocity profiler and GNSS/INS that is suited for demanding environments (Applanix OceanMaster).

SES-2000 Compact Sub Bottom Profiler

The SES-2000 compact model is the smallest member of Innomar's SES-2000 sub-bottom profiler family. It was designed for inshore surveys in shallow water down to 400 metres water depth, but can also be used in coastal areas.

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

ScanFish Magnetometer Frame

Fixed frame for 2D or 3D ScanFish Katria for up to 8 magnetometers (2x4) incl cables, excl magnetometers. 

Nano transponder with depth sensor

Additional beacon(s) for Sonardyne Micro-Ranger 2 system with Nano transponder package.

NaviSuite Kuda Acquisition and Processing Pro

Affordable software with deep feature list for hydrographic data acquisition and processing with unlimited complex underwater objects and remote displays.

OceanEnviro 10.4

The OceanEnviro^TM 10.4 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

ScanFish Konia

The EIVA ScanFish Konia is a unique ROTV solution with an integrated, high-quality SVP sensor.

Vector VS330™ GNSS Compass

Developed for precise marine, dynamic positioning, and land applications requiring precise heading and RTK position performance. 

NaviSuite Kuda Acquisition and Processing

Affordable software with deep feature list for hydrographic data acquisition and processing.

VideoRay Mission Specialist Series (MSS)

The VideoRay Mission Specialist ROV Series (MSS) utilises a system of interchangeable, modular components that communicate through a single, intelligent network.

Meridian Surveyor gyro

The higher performance gyrocompass, the Meridian Surveyor, provides a dynamic heading accuracy of 0.20° secant latitude RMS and a static heading accuracy of 0.05° secant latitude RMS.

SATELLINE-EASy

SATELLINE-EASy is a new state-of-the-art transceiver radio modem providing a compact and flexible solution for many different long-range applications. 

Sonic 2024

The Sonic 2024 is the world’s first broadband-wideband high-resolution shallow water multi-beam echo sounder. 

ScanFish Tropheus 3D

The ScanFish Tropheus 3D is a terrain-following ROTV especially designed for UXO detection. ScanFish Tropheus 3D is a hardware solution that augments the navigational capabilities of EIVA's range of ScanFish remotely operated towed vehicles (ROTVs) by introducing horizontal movement control capabilities.

Cormac 3

MacArtney Cormac winches are modular and self-contained in protective frames. They are constructed from glass-blasted AISI 304 stainless steel and require minimal maintenance.

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Sonardyne Micro-Ranger 2 system with Nano transponder

USBL package for tracking of mini ROVs and divers.

BlueROV2

The BlueROV2 is the world’s most affordable high-performance underwater ROV. With several thousand units out in the field, the BlueROV2 is one of the most popular underwater drones on the market!

ATTU cable

VideoRay ROV maintenance & repair kit

EIVA can supply spare parts and maintenance and repair kits for VideoRay Scout, Explorer and Pro 4 ROV series.

Magnetometer cable and tow points

EIVA can supply magnetometer cables in any length, with or without mounted towpoints.

Pro 4 Rugged BASE

The Pro 4 Rugged BASE Remotely Operated Vehicle (ROV) system has been specifically configured to quickly and effectively perform a variety of basic underwater tasks in environments where gear takes a beating. 

DMS-05 sensor

The DMS range of motion sensors is designed specifically for the motion measurement needs of the marine industry. 

C-Nav3050

The C-Nav3050 global navigation satellite system (GNSS) receiver provides 66-channel tracking, including multi-constellation support for GPS, and GLONASS.

Side Scan Sonar 4200

The 4200 series is a versatile sidescan sonar system that can be configured for almost any survey application from shallow to deep water operations. 

Sonic 2020

The Sonic 2020 is the most compact high-performance wideband shallow water multi-beam echo sounder, suitable for a wide variety of general mapping applications. 

ATTU-24

OceanEnviro 2.5

The OceanEnviro^TM 2.5 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

OceanEnviro 10.4 LV

The OceanEnviro^TM 10.4 LV is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

ATTU-24

VideoRay Pro 4 (multiple options)

The VideoRay Pro 4 ROV incorporates the latest in small ROV design and technology, making it the most advanced, capable and versatile small ROV on the market today.

G-882 Marine Magnetometer

The Geometrics G-882 caesium-vapour marine magnetometer is a low-cost, compact system designed for professional surveys in shallow or deep water. 

OceanEnviro 1.7

The OceanEnviro^TM 1.7 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

Minos•X CTD/SVP sensor, 1,000 m Delrin housing

Minos•X from AML is a small vertical profiler that allows you to change the instrument’s sensor load in the field and on demand.

Pro 4 MIL 300BASE

The P4 MIL 300BASE Military ROV system has been specifically configured for military, government, and force protection personnel to quickly and effectively perform a variety of underwater inspection tasks. 

ProFlex 800

The Spectra Precision ProFlex 800 is a powerful GNSS positioning solution that delivers state-of-art RTK features in a rugged, highly integrated receiver design. 

Side Scan Sonar 4125i

EdgeTech’s 4125i sidescan sonar system comes with a portable topside unit and was designed with both the Search & Recovery (SAR) and shallow water survey communities in mind. 

NaviSound 600

Teledyne RESON’s NaviSound 600 Series is a new range of advanced hydrographic survey echo sounders designed to meet the needs of hydrographic surveyors working on medium-to-large survey vessels.

2D Multibeam Imaging Sonar (M900-2250 Dual Frequency Series)

The 2D Multibeam Imaging Sonar is engineered to fit in small, tight spaces; it is 30% smaller than the popular P Series, and delivers the same crisp, real-time sonar imagery.

G-882 Marine Magnetometer

The Geometrics G-882 caesium-vapour marine magnetometer is a low-cost, compact system designed for professional surveys in shallow or deep water. 

ATTU-16

2D Multibeam Imaging Sonar (M900-2250 Dual Frequency Series)

The 2D Multibeam Imaging Sonar is engineered to fit in small, tight spaces; it is 30% smaller than the popular P Series, and delivers the same crisp, real-time sonar imagery.

OceanEnviro 8.6

The OceanEnviro^TM 8.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SPRINT 505 4k System

SPRINT is an acoustically aided Subsea Inertial Navigation system from Sonardyne for subsea vehicles and is depth rated to 4,000 m. 

Sonic 2024

The Sonic 2024 is the world’s first broadband-wideband high-resolution shallow water multi-beam echo sounder. 

ATTU-16

ProFlex 500

The ProFlex 500 is a positioning solution that delivers state-of-the-art RTK features in a rugged, highly integrated GNSS receiver design.

VideoRay Pro 5 (multiple options)

The VideoRay Mission Specialist Series (MSS) Pro 5 is designed to handle missions with size, space, weight, and deployment speed constraints, such as infrastructure inspections beyond the reach of divers, search & recovery, exploring the ocean floor up to 305m, and various others.

OceanEnviro 4.6

The OceanEnviro^TM 4.6 is a high-quality and cost-effective electrical winch for deployment of oceanographic and hydrographic equipment.

SPRINT-Nav 505 4k System

Sonardyne's SPRINT-Nav is an all-in-one subsea navigation instrument for underwater vehicles and is depth rated to 4,000 m.

Wayfinder DVL

The new Wayfinder DVL from Teledyne RD Instruments, at just 10 cm x 10 cm x 7 cm, is the smallest DVL Teledyne has designed, making it ideally suited for micro ROVs.