EIVA A/S

To use this site, please enable javascript

Upcoming NaviSuite training courses

Upcoming NaviSuite training courses

Software training courses

Teaching you the ropes through virtual training, classroom courses and blended learning

EIVA offers a variety of software training courses designed to enhance maritime professionals' understanding of NaviSuite, as well as improve their competences with the various tools and features of the range of NaviSuite products.

Software courses are delivered by expert instructors and are run according to a fixed schedule/calendar (detailed below), with training courses being conducted on a virtual platform, as well as at various locations around the world, including EIVA headquarters in Denmark.

Alongside fixed training courses, we also offer the opportunity to arrange customised training courses tailored to your business needs. These courses can be run both virtually and with an instructor physically at hand, depending on your requirements and the given possibilities. It is thus possible to build a course entirely around your requirements, allowing for selection of specific course contents, duration, time and location.

Any other requirements you have, we will be more than happy to hear about and work towards accommodating. If you are interested in this option, please get in touch.

  • NaviSuite navigation and acquisition
  • NaviSuite navigation and acquisition

Virtual training courses 

EIVA's virtual training courses are based on a mixture of eLearning and virtual training via Microsoft Teams. The most basic parts of the training curriculum are covered by modules on the eLearning site, while the virtual classroom course goes more into depth in relation to details of advanced subjects, hands-on training and offers a direct and individual dialogue with the instructor.

You already have products in your My EIVA basket

This product cannot be added to your basket as you already have products in your My EIVA basket.

Seats available
600.00excl VAT
Get in touch

Venue & Language

The course will be held virtually, via Microsoft Teams and will be conducted in Portuguese

Duration and timing

The duration of the classroom training is four days with training of the group taking place from 8:00 – 16:00 CDT (Houston local time) with coffee-breaks and lunch break. The training will be divided into 3 sessions of approximately 1 hour and 30 minutes of duration with the instructor and a designated time by the end of the training to work on exercises and seek instructor assistance on-demand

The instructor will setup and invite the participants to a half-hour pre-training meeting prior to the start of the course to ensure that all participants are aligned on the process, have met the eLearning requirements and have the software correctly installed and activated

Entry requirement

Attendance at the NaviSuite learning training courses presupposes that participants have passed the relevant EIVA eLearning modules (with a score of 80% in the quizzes) prior to the start of the course

eLearning modules to be passed (score of 80%) prior to attending the training course:

  • EIVA Geodesy
    • Geodesy
  • NaviPac 4
    • NaviPac 4.0 Configuration
    • NaviPac 4.1 Helmsman’s Display
    • NaviPac 4.2 Helmsman’s Display Runlines and Waypoint
    • NaviPac 4.2 Helmsman's Display Sonar Data and Remotes
    • NaviPac LogData 
    • NaviPac DataMon
  • NaviPac 3 
    • NaviPac 3.1 USBL Calibration
  • NaviScan
    • NaviScan 9.0
  • NaviModel 4
    • NaviModel 4.0 Patch Test

EIVA eLearning

Access to EIVA eLearning for 30 days is incl. in the course fee to allow the participant to prepare for the course and continued access for an additional 12 months can be purchased at the reduced price of €120 if purchase is made before the free EIVA eLearning account expires

Training days

Day 1-2: NaviPac 4/Helmsman's Display
Day 3-4: NaviScan and NaviEdit/NaviModel for patch-testing

Learning objectives

The virtual course is structured around a general curriculum to give the training course participants a broad understanding of the EIVA NaviSuite navigation and acquisition software solutions as well as teach them how to perform a patch-test with the use of NaviEdit and NaviModel.  

The training consists of case-based training sessions, in which an instructor will guide the participants through a series of hands-on training scenarios based primarily on the information acquired from the eLearning modules and combined with a short introduction to each main topic by the instructor

During the course, participants are guided through how to: 

  • Install the relevant NaviSuite software packages
  • Understand the architecture of NaviPac including folders and files structure
  • Configure NaviPac & NaviScan with common instruments, geodesy, objects etc
  • Perform advanced configuration setup with instrumentation, geodesy, objects, etc
  • Run various programs for different tasks (check instruments inputs, calibration, data quality control and troubleshooting)
  • Perform surface and under-water positioning
  • Log survey data for different tasks and in different formats
  • Start, configure and use the Helmsman’s Display
  • Create and manipulate waypoints, lines and runlines
  • Use different map background formats such as geotifs, shapes and other CAD files
  • Control the logging process from the Helmsman’s Display
  • Configure and use different view layouts using graphs, data views and range bearing views
  • Utilise eventing features of NaviPac
  • Utilise Camera Manager for video interface in Helmsman’s Display
  • Conduct a Patch Test calibration in NaviModel/NaviEdit

Target group

The course is aimed towards surveyors who have some experience with offshore survey work and a basic knowledge of hydrographic surveying

Certificate

An EIVA NaviSuite training certificate is issued to each trainee upon completion of the course

Access to NaviSuite

EIVA NaviSuite can be downloaded from our website for preparation purposes and can partially run in demo/simulation mode. Activation codes for full access and activation of the relevant NaviSuite software is provided for 30 days as part of the course

Technical information

The participant must have a stable internet connection to run Microsoft Teams smoothly

  • Minimum PC specifications:
    • OS Windows PRO Edition 10 or 11
    • 8 GB Ram as a minimum
    • 20 GB disk space
    • Graphics board 1GB Ram 
    • The user must have administrative rights over the PC
       
  • Other requirements:
    • A mouse with scroll function
    • A headset
    • 2 x monitors (one to view the training and one to perform the tasks)
    • Internet connection via LAN is recommended to avoid fluctuations in the connection 
  • Further details about the hardware and software specs can be found here

Securing your seat 

There is room for up to 8 participants at our virtual training courses and your seat is secured once we have received your payment. We only accept orders that are paid by credit card in our webshop

For further information, please do not hesitate to reach out