• NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)
  • NaviSuite Mobula Core (BlueROV)

NaviSuite Mobula Core (BlueROV)

Supplier:
EIVA
Product no:
NS.MOB2C

A complete software solution for ROV operations

Benefit from the advanced features of the NaviSuite products that are bundled in the NaviSuite Mobula solution, which is a complete topside software for your ROV. NaviSuite Mobula comes in different variants, allowing you to upgrade if you want to make use of sonar features.

Variants

NaviSuite Mobula is available in two variants for owners of BlueROV units: 

Please note that NaviSuite Mobula is also available in variants dedicated to VideoRay Pro 4 ROVs. If your ROV model is not supported, EIVA will happily work with the producer to integrate it.

Please note: This product is only available as annual subscription. 

excl VAT, excl shipping fee
Get in touch
Delivery time: A few hours

For subscription licences, you will get your purchased licence by email. For permanent licences, you will get a soft licence via email until you receive a physical dongle, which is sent once payment is received. For all orders paid by invoice, order processing (and thus estimated delivery time) will be initiated when EIVA has validated your details.

Key features and benefits

  • Cutting a long inspection story short: What you get

    Cutting a long inspection story short: What you get

    Make use of capabilities from the same high-end software as used by the most advanced subsea professionals – put together in a plug-and-play package.

    Learn more

    Cutting a long inspection story short: What you get

    Make use of capabilities from the same high-end software as used by the most advanced subsea professionals – put together in a plug-and-play package

    Key features of the NaviSuite Mobula Core variants include:

    • High-speed 3D software, providing data fusion/georeferencing for all sensor data, with multiple 3D views with map and satellite image backgrounds
    • ROV camera in near real time
    • Joystick steering of ROV
    • Assisted steering, lock depth, lock heading features
    • Video and still imagery, multi-camera recording and playback synchronised with ROV track
    • Eventing, registration of events/objects of interest in 3D
    • Connect remote displays over the internet so others can follow your operation
    • Deliver your inspection in a NaviModel project so anyone with NaviModel Free Viewer can fly through the data
  • ROV steering

    ROV steering

    NaviSuite Mobula allows users to control various ROV models. Templates can be selected to help with setup for different scenarios and users can steer the ROV while utilising video feeds, eventing and sonar for inspections.

    Learn more

    ROV steering features

    NaviSuite Mobula allows users to control various ROV models. Templates can be selected to help with setup for different scenarios and users can steer the ROV while utilising video feeds, eventing and sonar for inspections.

    ROV joystick steering

    ROVs can be controlled using joystick with NaviSuite Mobula.

    ROV joystick steering

    Auto-depth and auto-heading

    Depth and heading are automatically calculated.

    Auto-depth and auto-heading

    BlueROV steering

    With ROVs that have six thrusters, in addtion to the steering options of forward, reverse, ascend and descend, it is possible to steer the ROV from side to side.

    BlueROV steering
  • General visualisation

    General visualisation

    NaviModel and NaviPac share the same 3D engine, and therefore the same powerful 3D visualisation features. Data can be visualised in 2D, 3D, side view or by time.

    Learn more

    General visualisation features

    NaviModel and NaviPac share the same 3D engine, and therefore the same powerful 3D visualisation features. Data can be visualised in 2D, 3D, side view or by time.

    3D seabed terrain 

    Seabed terrain can be visualised in a 3D environment.

    3D seabed terrain

    Multiple Map Views

    Multiple Map Views are available.  Each individual Map View window can be configured separately to display only the information required.

    Background Maps 

    Background Web Map Service (WMS) maps can be displayed.

    Background Maps

    Import 3D models 

    3D models can be imported into NaviModel (drag and drop into the Map View window).

    Import 3D models

    Link 3D models to live objects 

    3D models can be linked to any live objects (Vessel, ROV, Scanfish etc).

    Link 3D models to live objects

    2D, 3D and side-view displays 

    2D, 3D or Side views allows the user to quickly change the view facilitating better data interpretation.

    3D, 2D and side-view displays

    Visibility Slider 

    Visibility slider allows users to compare different DTM’s quickly.  This enables comparison over time or between different data processing methods.

    Visibility slider

    Control colours, lights, details 

    DTM light and palette settings can be changed at any time.

    Control colours, lights, details
  • Navigation and routes

    Navigation and routes

    NaviPac is an integrated navigation and data acquisition software solution that includes surface and subsea navigation, route and waypoint planning, live tracking and piloting.

    Learn more

    Navigation and routes features

    NaviPac is an integrated navigation and data acquisition software solution that includes surface and subsea navigation, route and waypoint planning, live tracking and piloting.

    Live position of multiple objects

    NaviPac Helmsman’s Display 4 (based on the same core as NaviModel) supports display of vehicle data (main vessel, ROV, ROTV, remotes etc) based on the NaviPac data feed. The data can be shown graphically in multiple map views.

    Live position of multiple objects

    AIS tracks

    All variants of NaviPac supports integration with AIS receivers. The data is read into NaviPac and can be shown in a dedicated AIS window and overlaid in the HMD. We perform an even read and utilise vessel dimension information.

    AIS tracks

    Display north-up, heading-up, route-up

    Each Map View can be designed and controlled individually when it comes to content, overlays and layout. Map Views can be 2D, 3D or side-views, and orientation can be user defined, north-up, vehicle up or line up.

    Display north-up, heading-up, route-up

    Manual waypoint drawing

    NaviPac supports a series of runline and waypoint formats including our own RLX/WPT format, ad generic ASCII readers. You can also draw lines and points directly in the Map View.

    Manual waypoint drawing

    Vehicle control panel for multiple vehicle runlines and display DOL

    Assignment of lines and waypoints are handled through the dedicated Vehicle Control view, as you may control multiple vehicles simultaneously. Each controlled vehicle will be available as distance offline indicator (DOL/DCC) and various runline information (along line, target ETA etc.).

    Vehicle control panel for multiple vehicle runlines and display DOL

    Distance to waypoint

    Waypoints are handled in a similar manner to runlines, as assignment of the waypoint is done in the Vehicle Control View. Hereafter, an artificial runline is created from the vehicle to the point and NaviPac monitors the range/bearing to the destination. and can a,.o. feed that into autopilots and DP systems.

    Distance to waypoint
  • Sensor interfacing and recording

    Sensor interfacing and recording

    Many different sensors can be interfaced and integrated in both NaviScan and NaviPac.

    Learn more

    Sensor interfacing and recording features

    Many different sensors can be interfaced and integrated in both NaviScan and NaviPac.

    Surface positioning and motion (GPS, Gyro, IMU)

    Setting up an entire vessel based project in NaviPac is easy performed using intuitive graphical definition tools. The video covers basic project definition, geodetics and vessel navigation setup.

    Surface positioning and motion (GPS, Gyro, IMU)

    Subsurface positioning (USBL, DVL, INS, Gyro, IMU)

    Setting up remote and subsea vehicles is done in a similar manner to the main vessel – easy and intuitive. Adding instruments, positioning sources (transponders, INS, LBL etx) and defining weighting and Kalman filter settings is possible.

    Subsurface positioning (USBL, DVL, INS, Gyro, IMU)
  • Sensor processing

    Sensor processing

    NaviEdit can be used to recalculate data very quickly and where our sensor processing takes place. Here we change offsets, C-O’s, mounting angles, apply tide, apply SVP, de-spike sensors, improve object positioning, Kalman filtering, remove swell etc.

    Learn more

    Sensor editing (import and manual editing)

    Sensor editing takes place in NaviEdit Data Editor.  If required, we can run the following actions:
     
    • De-spike
    • Interpolate
    • Delete
    • Translate
    • Scale
    • Rotate
    • Smooth

    Sensor processing features

    NaviEdit can be used to recalculate data very quickly and where our sensor processing takes place. Here we change offsets, C-O’s, mounting angles, apply tide, apply SVP, de-spike sensors, improve object positioning, Kalman filtering, remove swell etc.

    Subsurface positioning (USBL, DVL, INS, Gyro, IMU)

    NaviEdit Header Editor allows the user to check an ROV setup.

    NaviEdit Data Editor allows the user to view and QC sensor data via a series of graphical displays.

    Subsurface positioning (USBL, DVL, INS, Gyro, IMU)
  • Eventing

    Eventing

    The many eventing features include auto-calculation of event types and an easy-to-use event tablet view.

    Learn more

    Eventing features

    The many eventing features include auto-calculation of event types and an easy-to-use event tablet view.

    Configurable event types, hierarchy, and properties

    Client and company specific event collections can be tailored to the activity undertaken.

    During EIVA Days Denmark 2018, we presented a major expansion to the functionality of camera based scanning.

    Configurable event types, hierarchy and properties

    Create events

    Events can be created quickly and are automatically placed onto a DTM.

    Tablet for fast event creation

    Using the eventing tablet view allows for quicker event creation. With the eventing tablet, you can quickly add all events, or customise which events to add with just a few steps.

    Tablet for fast event creation

    Create freespan and burial events

    Pipe and seabed markers are used to create freespan and burial events.

    This means that events and seabed markers always tie-in.

    Create freespan and burial events

    Recalculate events

    Events can be recalculated at any time.

    Recalculate events

    Export events

    User configurable templates can be created to export events in the format required.

    Export events

    Export nearest image and videos

    Images and videos can be exported for each event or for selected events.

    Export nearest image and videos

    Create pipetracker gap events

    Pipetracker gap events are created from continuous sections of rejected pipetracker data.

    Create pipetracker gap events
  • Videos and images

    Videos and images

    Video and still images that contain time stamps can be combined with other data sources in NaviModel.

    Learn more

    Videos and images features

    Video and still images that contain time stamps can be combined with other data sources in NaviModel.

    Drape images on digitised pipe

    Video images can be wrapped around an existing pipe or digitised line in the Map View window.

    Drape images on digitised pipe

    Play and control video

    Digital video acquired in external systems can be played and controlled inside NaviModel.

    Play and control video

    Synchronise video with track

    In NaviModel the track contains the date and time and must be synchronised with the video time to enable videos to play.

    Normally the video time and track time are recorded in the same time zone. However sometimes this is not the case and we need the option to change the video / track time so that video will play.

    Synchronise video with track

    Adjust video hue, brightness, contrast and gamma levels

    Hue, brightness, contrast and gamma levels can be adjusted to improve badly lit videos.

    Adjust video hue, brightness, contrast and gamma levels

    Display video images (Waterfall)

    Video images can be displayed as a vertical waterfall.

    Display video images (Waterfall)
  • Optional extra services and special offers

    Optional extra services and special offers

    EIVA offers a number of services for our NaviSuite software users.

    Learn more

    Optional extra services and special offers

    Get the most out of your software

    EIVA offers a number of services for our NaviSuite software users. These include:

    Also, we have a number of special offers:

Product comparison

  NaviSuite Mobula Core NaviSuite Mobula Core + Sonar
3D software: Multiple views, map backgrounds, etc x x

Joystick steering: Lock heading, lock height, pitch/roll displays

For 6-thruster units: the possibility of moving sideways

x x
Video: Multiple cameras, live video streaming and video recording and playback x x
3D positioning and navigation (requires USBL, DVL or INS sensors): Position the ROV on the map, synchronise video with position and define route x x
Eventing: Make use of the full NaviSuite eventing package for registration of the dive and observations in 3D   x

Sonar functionalities: Connect your forward-looking sonar from eg Tritech or add a small multi-beam echo sounder to scan the surroundings

For setups with a forward-looking sonar: Live wedge in a 3D display and mosaic generation (requires positioning and navigation sensors)

For setups with a multi-beam/scanning sonar: Build point clouds of seabed and surroundings (requires positioning and navigation sensors)

  x